Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Technician
    Join Date
    Nov 2017
    Posts
    26
    Rep Power
    13

    Kyocera M2535dn Paper jam before fuser.

    Hi guys, I need your help with this one


    I have a strange issue with a Kyocera M2535dn where the paper jams before the fuser and the page folds in half.
    I have tried replacing the fuser, drum, rollers and cleaning inside the machine but problem still persists.


    This machine only has 50k prints.This issue is intermittent and I dont know what else to try. Hopefully you guys could help.


    Thanks

  2. #2
    Service Manager 10,000+ Posts
    Kyocera M2535dn Paper jam before fuser.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,606
    Rep Power
    658

    Re: Kyocera M2535dn Paper jam before fuser.

    try blowing out the sensors in that are.

    when you say before the fuser... it doesn't make it into it?
    sounds like there is something stopping/blocking paper movement

  3. #3
    Technician
    Join Date
    Nov 2017
    Posts
    26
    Rep Power
    13

    Re: Kyocera M2535dn Paper jam before fuser.

    Hi Phil

    Yes the paper does not make it into the fuser. It's like the paper does a loop at the fuser guide and folds in half. I checked for any obstructions but theres nothing and cleaned the area out.

    I first suspected it was a fuser issue, so I swapped out with a new one but the issue still occurs.

  4. #4
    Service Manager 10,000+ Posts
    Kyocera M2535dn Paper jam before fuser.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,606
    Rep Power
    658

    Re: Kyocera M2535dn Paper jam before fuser.

    Quote Originally Posted by vee1989 View Post
    Hi Phil

    Yes the paper does not make it into the fuser. It's like the paper does a loop at the fuser guide and folds in half. I checked for any obstructions but there's nothing and cleaned the area out.

    I first suspected it was a fuser issue, so I swapped out with a new one but the issue still occurs.
    sometimes those fusers can get placed wrong.. make sure it is seated properly make sure your image unit is seated properly also.

    have you tried it with fresh paper? sometimes wet/damp paper can make it curl up or down. if it still does it take paper out of tray and flip it over.

  5. #5
    Technician
    Join Date
    Nov 2017
    Posts
    26
    Rep Power
    13

    Re: Kyocera M2535dn Paper jam before fuser.

    I made sure fusers were installed correctly and flush, tried with new paper and a cassette just to make sure that it was not the paper. Issue still occurs if using the MP tray as well.

    I even swapped out the transfer which doesn't help.

  6. #6
    Service Manager 10,000+ Posts
    Kyocera M2535dn Paper jam before fuser.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,606
    Rep Power
    658

    Re: Kyocera M2535dn Paper jam before fuser.

    Quote Originally Posted by vee1989 View Post
    I made sure fusers were installed correctly and flush, tried with new paper and a cassette just to make sure that it was not the paper. Issue still occurs if using the MP tray as well.

    I even swapped out the transfer which doesn't help.
    where EXACTLY is the problem occurring?

    before transfer?

    after?

    is there image on the page?

  7. #7
    Technician
    Join Date
    Nov 2017
    Posts
    26
    Rep Power
    13

    Re: Kyocera M2535dn Paper jam before fuser.

    Before fuser, after transfer. Image forms fine, just that it does not get to fusing. When I remove the drum that's how the paper sits, please see pics.
    Attached Images Attached Images

  8. #8
    Service Manager 10,000+ Posts
    Kyocera M2535dn Paper jam before fuser.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,606
    Rep Power
    658

    Re: Kyocera M2535dn Paper jam before fuser.

    Quote Originally Posted by vee1989 View Post
    Before fuser, after transfer. Image forms fine, just that it does not get to fusing. When I remove the drum that's how the paper sits, please see pics.
    it appears whatever drives the page from that point has failed.

  9. #9
    Senior Tech 100+ Posts jewen25's Avatar
    Join Date
    Mar 2009
    Location
    RP
    Posts
    191
    Rep Power
    0

    Re: Kyocera M2535dn Paper jam before fuser.

    Is theres any sound? Just try to check the Gear44 beside the motor
    ERROR HELP ME AND HELP YOU

  10. #10
    Technician
    Join Date
    Nov 2017
    Posts
    26
    Rep Power
    13

    Re: Kyocera M2535dn Paper jam before fuser.

    There are no strange sounds. This problem is intermittent as the copier sometimes worked perfectly. There seems to be a problem with the fuser being driven.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here