hello everyone ,
my kyocera FS-6525MFP hang after avery energy saving , and won't wake up till i unplug and replug the power .
thanks in advance
hello everyone ,
my kyocera FS-6525MFP hang after avery energy saving , and won't wake up till i unplug and replug the power .
thanks in advance
check the power supply pwb and see if the two large capacitors are bent at the top.i have been replacing a lot of these faulty caps.they are available from any electronic store and only cost about $6 aus each
You can try and update firmware to the latest for you machine, if it doesn't help you, you can play around with sleep settings through web interface for your device. There are probably 2 sleep setting to adjust... Don't remember - need to check. Sort of sleep and deep sleep...
Good luck!
Well, you may ask authorized Kyocera techs (here ot somewhere else) to share it, since it probably will be hard to find those on internet by just googlin it.
Another way - you can try your luck with Kyocera customer support service by giving them full report of the problem and explaining all details.
Good luck!
Bookmarks