Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jul 2018
    Posts
    3
    Rep Power
    0

    FS-1010 always in adding toner

    Hi, my name is Andrea and I have a problem with one of my FS-1010 (I know it's an old printer but for me is ok and I have o lot of new toner can). It's stay always in the adding toner state during power on sequence. I did ceck a couple of think but now I have some question:
    How the printer know that the toner loaded is enought? So the question is why it's don't stop to load the toner?
    I did ceck the solenoide but none of the three are activated. I ceck that the gear inside the drum rotate freely and they did.
    Some advice?

  2. #2
    Junior Member
    Join Date
    Jul 2018
    Posts
    3
    Rep Power
    0

    Re: FS-1010 always in adding toner

    I try to swap the drum of the not working printer in a working unit and it's work.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here