FS-9130dn

[stevee104]

Just sold 2 of these machines, one has a high cap tray but the machine defaults to tray one.Is there any way to make the high cap tray the default tray though the machince setting.I have look at the menu map
and can't find anything.

[blackcat4866]

Send this PreScribe command to your printer:

!R! FRPO R4, *; EXIT;

Where *=
0 = MPT
1 = cassette 1
2 = cassette 2
3 = cassette 3
4 = cassette 4
5 = cassette 5
6 = cassette 6
99 = envelope feeder/universal feeder FS-9000

You can use as your sending utility IC Link, KM Net Viewer, LPR Jar, or whatever you're using to send PreScribe commands to the printer. I don't think that the webpage for this printer has a Printable Data option.

I hope that is clear enough... =^..^=

[LNorris]

can that be set via the FRPO settings in the Command Center as well?

[blackcat4866]

I don't have any 9130s, so I don't know if it has an FRPO webpage. If it does, sure. It's sister machine the CS-5050 does have an FRPO page.