Hi..
web admin password for FS 3140 is admin00 and some user has change it and forget that password.
so how can we reset that password ?
Hi..
web admin password for FS 3140 is admin00 and some user has change it and forget that password.
so how can we reset that password ?
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Hi guys,
This is my first post on the forum, but I have been using it for a while now for information on kyocera machines.
Thanks to all for this great forum and your knowledge you share.
Now to my question. I have the exact same problem as above and i have read the forum to try and get a solution, but nothing worked. I have tried the password and engine reset prescribe commands and there is no u21 on the fs3140 model i have.
Can anyone help me with this please?
Thanks
You will probably have to call the helpdesk : they should be able to 'REMOTE' to this unit and reset it.
Good Luck !!
"The Serenity Prayer" . . .
God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .
One customer changed the admin password and didn't remember it. I also tried Prescribe commands, but ended up with replacing the mainboard.
Hi all,
I was able to solve my problem .
I could not find the simulation U21 in service mode and then I read about a secret service mode.
This is the secret code that worked on the fs-3140
06141010
Got into the secret service mode and found sim U21. I ran it and tada! All works fine now and the password for web interface was reset back to admin00.
Just remember to run sim U917 and backup everything to a usb stick and also take not of your network settings.
Thanks
Last edited by DWise; 01-09-2013 at 02:52 PM.
Do for one what you wished you could do for everyone. - Andy Stanley
I searched the forum for a second level or secret service mode and came up on this code. I have tried it on a fs-3640 and it does not work on that particular machine, so I think it only works for a certain range/year machine being released. Other models might have different codes, not sure.
Bookmarks