Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician
    Kyocera FS 1035 won't print from sleep


    Join Date
    Dec 2012
    Location
    Utica, NY
    Posts
    11
    Rep Power
    10

    Kyocera FS 1035 won't print from sleep

    Prints ok til the machine goes to sleep...if you wake it up it then prints the job....single computer, USB port....any ideas?


  2. #2
    Service Manager 10,000+ Posts
    Kyocera FS 1035 won't print from sleep

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: Kyocera FS 1035 won't print from sleep

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



  3. #3
    Field Supervisor 500+ Posts HenryT2's Avatar
    Join Date
    Apr 2010
    Location
    Land Mass
    Posts
    951
    Rep Power
    36

    Re: Kyocera FS 1035 won't print from sleep

    How are you waking this MFP up ....? Power cycle ? Sending a print job ?

    What is the sleep timer set to ?
    Is this set for quick recovery ?

    "The Senility Prayer" . . .
    God grant me the senility to forget the people I never liked, the good fortune to run into the ones I do, and the eyesight to tell the difference.

  4. #4
    Field Supervisor 500+ Posts Exok's Avatar
    Join Date
    Jun 2011
    Location
    Edison, NJ
    Posts
    731
    Rep Power
    26

    Re: Kyocera FS 1035 won't print from sleep

    I had a similar Kyocera printer that would not wake from sleep mode. If you sent print jobs while it was pre-sleep it would print fine. If you let it go to sleep and sent a print job it would do nothing. If you powered off / on it would then print the job sent to it in sleep mode.

    Updating the firmware corrected this problem. The hard part was getting the correct memory card required to do it. This model required a compact flash (CF) card but it had to be 256MB. The smallest I was able to find at local electronic stores was 8GB (didnt work) , then I tried a 2GB I picked up on amazon (didnt work) Finally I obtained a 256MB and that did work.


  5. #5
    Technician
    Kyocera FS 1035 won't print from sleep


    Join Date
    Dec 2012
    Location
    Utica, NY
    Posts
    11
    Rep Power
    10

    Re: Kyocera FS 1035 won't print from sleep

    The copier was waking up by a print job from the computer and sleep was set at 1 min....I had the customer log everything that wouldn't print ..as I sat in front of the computer I got to try each print job that was attempted...Turned out that the customer was using the bypass as a legal tray but was set for letter....when a legal document was sent to print, the copier "thought" it couldn't print to legal....changed MP tray to legal in common settings....this also took care of letter prints out of some programs...for some reason it wouldn't print with paper in the bypass[that the machine thought was letter] Thanks for the responses Joe


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here