Can anyone give me the part # for the FS-4020 Take up / feed roller kit # please.
Thanks
Hans
Can anyone give me the part # for the FS-4020 Take up / feed roller kit # please.
Thanks
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
No official kit, just these numbers:
Bypass
figure 5-8 Pickup Roller 5AAVR0LL+051
figure 5-38 Separation Pad 302F994070
Tray #1
figure 7-A01 Pickup/Feed Holder Assy 302F994062
figure 4-17 Retard Roller 302F909170
Tray #2 (PF-310)
Figure 2-3 Pickup/Feed (2) 305H280280
figure 3-13 Separation 302F909170
Tray #2 (PF-315)
figure 1-12 Pickup/Feed/Separation (3) 5AAMPF7A++03
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks Cat.
Haven't seen you for a long time here on CT. Hopefully you are OK.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
I've been skulking around, peering out of the shadows. You know, cat stealth mode.
I've been accompanying the KM rep most of last week. There have been plenty of opportunities to stay humble.
I haven't had a whole lot of wisdom to offer lately. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
LOL
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Bookmarks