Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts glenbennett's Avatar
    Join Date
    May 2015
    Location
    florida
    Posts
    63
    Rep Power
    6

    Lexmark cx510de Maintenance kit

    Hello

    I have a Lexmark cx510de and its telling me to change Maintenance kit. However I changed the Maintenance kit and its still telling me to change it... Is there a way to go into system settings and clear this from the LCD screen?

    Thank You


  2. #2
    Field Supervisor 1,000+ Posts subaro's Avatar
    Join Date
    Oct 2010
    Posts
    1,129
    Rep Power
    30

    Re: Lexmark cx510de Maintenance kit

    diag mode : hold key 3 and 6 and power on machine. keep holding for about 15 sec and then release.

    To reset the fuser count:1 Select Printer Setup from Diag Menu, and press Select.2 Select Reset Fuser Cnt, and press Select.3 Select Reset, and press Select.Reset Resetting… appears.4 To cancel a reset, press Back.


    Entering the Configuration menu1 Turn off the printer.2 Press and hold 2 and 6 while turning on the printer.Release the buttons when the splash screen appears.Reset Separator Roll and Pick Assembly CounterThis setting enables an service technician to reset the value of the separator roll and pick assembly’smaintenance counter to zero (0) after replacing it.

    I think the message is mainly to reset the fuser count. hope this solves it. You should get a service pdf manual for the machine.

    THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here