Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28
  1. #21
    Senior Tech 100+ Posts onlyinnewfoundland's Avatar
    Join Date
    Apr 2013
    Posts
    155
    Rep Power
    11

    Re: Faulty Lexmark Imaging Units.

    Hey guys

    I also have issues with IU's from Lexmark...we get the majority of our supplies through Synnex - we are in Canada, so not sure how widespread the issue is.

    I know Lexmark was recently purchased by a Chinese aftermarket company so I suspect the quality will probably go down but everything will get even cheaper as a result.

    85% of my base up here is Canon so I am extremely jaded by all these trivial issues the Lexmark boxes seem to have. We are selling BSD stuff so, no consumer stuff. I have noticed on the XS792 series (not sure what the consumer equivalent is) we go through a lot of colour carts way before they are done. Seems like what happens is the cartridge does not have a very reliable ATR system compared to Canon and others...most of them that I have hauled apart have the transfer roller in bad shape and they are usually starved of toner. Drum surfaces seem okay and tend to last.

    On average, I'd say we are getting somewhere in the ballpark of 50-85% use out of them and they start showing issues.

    The newer models seem okay (XC6152, 4150, etc) - haven't had any failures other than the system software being pretty bad.


  2. #22
    Sharp & HP Tech 100+ Posts austonrush's Avatar
    Join Date
    Jan 2010
    Location
    Guelph
    Posts
    186
    Rep Power
    18

    Re: Faulty Lexmark Imaging Units.

    We also have issues with Lexmark imaging units not getting anywhere near the life advertised....

    A new generation of machines has just been released lets see if they are any better.


  3. #23
    Service Manager 1,000+ Posts
    Faulty Lexmark Imaging Units.

    Lagonda's Avatar
    Join Date
    Aug 2008
    Location
    Brisbane
    Posts
    1,402
    Rep Power
    51

    Re: Faulty Lexmark Imaging Units.

    Quote Originally Posted by Brandon55 View Post
    We also have issues with Lexmark imaging units not getting anywhere near the life advertised....

    A new generation of machines has just been released lets see if they are any better.
    Log a job with Lexmark and then send them back to your local supplier for a credit. It won't be until that it starts to hurt them financially will anything be done. They just don't seem to care that the end user is inconvenienced by given faulty consumables.

    At least 50% of IT is a solution looking for a problem.

  4. #24
    Sharp & HP Tech 100+ Posts austonrush's Avatar
    Join Date
    Jan 2010
    Location
    Guelph
    Posts
    186
    Rep Power
    18

    Re: Faulty Lexmark Imaging Units.

    Oh I send them back for replacement all the time (especially if there on MPS contract printers). I never have an issue getting a credit for them, it is just stupid that Lexmark can claim a 60k life cycle for a drum that I'm lucky to get 20-30k out of at most.... From a customers perspective it doesn't look good because the machine print quality looks horrible but, there printer reports the photoconductor has a lot of life remaining.

    The optics look bad (yes the pun is totally intended). lol


  5. #25
    Service Manager 1,000+ Posts
    Faulty Lexmark Imaging Units.

    Lagonda's Avatar
    Join Date
    Aug 2008
    Location
    Brisbane
    Posts
    1,402
    Rep Power
    51

    Re: Faulty Lexmark Imaging Units.

    I've got yet another 4 sitting beside my desk waiting for me to process Jeez, its depressing

    At least 50% of IT is a solution looking for a problem.

  6. #26
    Technician
    Join Date
    Dec 2012
    Posts
    11
    Rep Power
    12

    Re: Faulty Lexmark Imaging Units.

    Quote Originally Posted by Thom View Post
    I have a customer with an MX812 that has had light copies and gets only about 10k - 15k from them. I'm pulling my hair out trying to figure out if it's the imaging units or the printer...(a new IU fixes the issue for 10K - 15k then it gets light and streaky again).

    Dont pull your hair out... its the IU - they are crappy! manufacturing problem with the DB.


  7. #27
    Service Manager 1,000+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    1,333
    Rep Power
    21

    Re: Faulty Lexmark Imaging Units.

    Quote Originally Posted by Thom View Post
    I have a customer with an MX812 that has had light copies and gets only about 10k - 15k from them. I'm pulling my hair out trying to figure out if it's the imaging units or the printer...(a new IU fixes the issue for 10K - 15k then it gets light and streaky again).
    i'm not impressed with the newer line of Lexmark ANYTHING.


  8. #28
    Technician
    Join Date
    Dec 2012
    Posts
    11
    Rep Power
    12

    Re: Faulty Lexmark Imaging Units.

    Quote Originally Posted by Phil B. View Post
    i'm not impressed with the newer line of Lexmark ANYTHING.
    its not a new line, its the same excat machine with a new name and a smaller toner cartridge - MX417 instead of MX410.

    no improvments what so ever in the IU section.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here