Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    Forms Printer 2591n+ (2591-510)


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Forms Printer 2591n+ (2591-510)

    I've got this printer that the following lights are flashing when power is applied:

    Ready
    Paper Out
    Panel Lock (icon)
    Lock (lower left corner)

    I found a document stating that if the Ready, Tractor 2, Paper Out & Panel Lock (icon) lights are flashing, the printhead is defective. I can't find what my code may be. I was guessing the main logic board. Can anyone give some advise, please?

    Thank You

  2. #2
    Service Manager 1,000+ Posts
    Forms Printer 2591n+ (2591-510)


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: Forms Printer 2591n+ (2591-510)

    I believe I found my answer. Couldn't find this in the manual earlier while onsite.

    "Home Position Error Without Alarm". Possible power problem.

  3. #3
    Service Manager 1,000+ Posts theengel's Avatar
    Join Date
    Nov 2011
    Location
    North Bend
    Posts
    1,780
    Rep Power
    51

    Re: Forms Printer 2591n+ (2591-510)

    I wonder what they mean by "without alarm". I would think a home position error would mean the carriage isn't moving back and forth correctly.

  4. #4
    Service Manager 1,000+ Posts
    Forms Printer 2591n+ (2591-510)


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: Forms Printer 2591n+ (2591-510)

    According to that section, IF there is an alarm (Beeps 10 times), it says "Home Position Error -- Go to "Carrier service check""

    What pertains to my specific situation it says "Home Position Error Without Alarm -- Go to "Power service check""

  5. #5
    Service Manager 1,000+ Posts
    Forms Printer 2591n+ (2591-510)


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: Forms Printer 2591n+ (2591-510)

    Just a final update on this one. Replaced the fuse on the power supply and the printhead. Running good again.

    On to the next 2591. This one needs a new carriage. The gears that keep the ribbon moving are busted up.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here