Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Lexmark MS810n Re-install missing or unresponsive fuser (31.80)


    Join Date
    Jan 2016
    Location
    Centereach, New York
    Posts
    188
    Rep Power
    6

    Lexmark MS810n Re-install missing or unresponsive fuser (31.80)

    I received a call from a client with the above message, they tried re-seating the fuser with the printer off and unplugged. I ordered a new fuser maintenance kit and installed it. I still have the same error. I'm not really familiar with these printers and am unsure if there is a way to correct this error. I checked the connector to the fuser and it seems fine. Thank you in Advance.


  2. #2
    Senior Tech 100+ Posts
    Lexmark MS810n Re-install missing or unresponsive fuser (31.80)


    Join Date
    Jan 2016
    Location
    Centereach, New York
    Posts
    188
    Rep Power
    6

    Re: Lexmark MS810n Re-install missing or unresponsive fuser (31.80)

    I'm going to check the controller board and make sure the J27 wire is plugged in, if it is, I will replace the controler board. I will let you know how it ends up.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here