LExmark X264DN grinding noise while printing

**spree** · 03-16-2017

The lever is out

Thank you for your help.

**spree** · 03-27-2017

Today I changed Media feed (ACM) clutch (40X5370), but the noise is still here. The clutch is jumping. I think the gearbox is fault, or the shaft.

**spree** · 03-28-2017

Any idea what to do? What is fault?

**Lance15** · 03-28-2017

The only other parts are the gear assembly or the autocomp assembly.

Can you tell/see if the issue is in the main gear assembly? The end of the autocomp (the arm with the rollers) has a small gear cluster in it. Perhaps there's something wrong in there making it appear there is something wrong in the main drive assembly?

**spree** · 03-29-2017

Originally Posted by Lance15

The only other parts are the gear assembly or the autocomp assembly.

Can you tell/see if the issue is in the main gear assembly? The end of the autocomp (the arm with the rollers) has a small gear cluster in it. Perhaps there's something wrong in there making it appear there is something wrong in the main drive assembly?

What I see the gear assembly is good, but the autocomp (the arm with the rollers) I must check it, because the grinding noise is when the paper is picking up.

Here is the picture of the autocomp:

40x5453.jpgI think here is the problem, I must check it. Thank you for help.