Results 1 to 4 of 4
  1. #1
    Technician ShonRipz's Avatar
    Join Date
    May 2017
    Location
    Ansonia, Connecticut
    Posts
    21
    Rep Power
    2

    Exclamation Lexmark xs798de jams at fuser exit?

    I've cleaned fuser exit sensor and I've been unable to duplicate this issue. Tested all trays no problem but customer tells me the paper stops out of the fuser. Is there a jam report for these lexmarks? Don't see anything in 2-6 mode. More of a Toshiba /richoh technician so I'm no Lexmark expert. Any help is appreciated, thanks!


  2. #2
    Senior member of CRS 2,500+ Posts
    Lexmark xs798de jams at fuser exit?

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    2,963
    Rep Power
    82

    Re: Lexmark xs798de jams at fuser exit?

    Quote Originally Posted by ShonRipz View Post
    I've cleaned fuser exit sensor and I've been unable to duplicate this issue. Tested all trays no problem but customer tells me the paper stops out of the fuser. Is there a jam report for these lexmarks? Don't see anything in 2-6 mode. More of a Toshiba /richoh technician so I'm no Lexmark expert. Any help is appreciated, thanks!
    It will be in the diag menu 3&6, not the configuration mode 2&6.
    Does it 'jam' in fuser from all users or just one? Maybe a print driver default to exit at fuser.

    "You can't trust your eyes, if your mind is out of focus" --

  3. #3
    Junior Member Dragord's Avatar
    Join Date
    Sep 2014
    Location
    Wincanton, Somerset
    Posts
    5
    Rep Power
    0

    Re: Lexmark xs798de jams at fuser exit?

    I had a problem just like this on a two year old machine. You could hear it "clipping" as the paper started coming out of the redrive assembly, about 30mm in from the rear edge there was a tiny nick in the leading edge of the paper.
    The fault was the paper at the backside was being formed into a "corrugated" shape by the exit rollers of the redrive unit and catching a virtually non existant ridge on the underside of the exit switch bar.
    I put 60mm of insulation tape along the underside of the bar, to help guide the paper past, and all the clipping and jamming stopped.


  4. #4
    Junior Member
    Join Date
    Aug 2017
    Location
    Evora
    Posts
    2
    Rep Power
    0

    Re: Lexmark xs798de jams at fuser exit?

    Check menu PAPER Setting. Maybe wrong paper size on driver


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here