Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Dec 2007
    Location
    Los Gatos CA
    Posts
    30
    Rep Power
    21

    Another T630 issue - Duplexer this time

    Machine not duplexing. Paper comes part way out the output bin, then throws an error of potential jam, check duplexer. Well, duplex tests from the diag mode don't work, I put on a known good duplexer with the same result, checked cabling from J29 on mobo to the bottom connector, looks OK (but my last cheapie volt meter/ohmeter bit it, and I didn't have one with me). Tried another mobo, same result. Seems like the duplexer motor is not turning on, but I know it's a good duplexer. Could it be a short in the cable to the connector? I do see that the connector is daisy-chained to the envelope feeder connector as well. As I say, the wiring looks OK. I'm not sure where else to look other than the wire and the connector itself. Wondering if anyone else has seen a similar issue. Thanks, all!


  2. #2
    Dangerous with Tools 1,000+ Posts
    Join Date
    Apr 2008
    Location
    Living in Exile
    Posts
    1,654
    Rep Power
    0

    Another T630 issue - Duplexer this time

    uninstall envelope feeder. install duplex unit again and see if it works without envelope feeder.


  3. #3
    Technician
    Join Date
    Dec 2007
    Location
    Los Gatos CA
    Posts
    30
    Rep Power
    21
    Oops, perhaps you misunderstand. Although I traced J29 to both the bottom and envelope connector, this unit has no envelope feeder on it.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here