Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Dec 2011
    Location
    Chicago,IL.
    Posts
    13
    Rep Power
    12

    Lexmark 734 Continuing to say close front door

    Hello everyone,

    I am trying to get a little help on a Lexmark X734DE; in which I am continually getting a message to close front door. I have replaced both door interlock switches (one in the middle and the one on the bottom). Can anyone help me figure what else this could be? I have ohmed both switches and they are good. The machine completes the calibration and goes to the ready screen; when I push the copy button, it tells me system busy and the front door message returns.


  2. #2
    Master Of The Obvious 10,000+ Posts
    Lexmark 734 Continuing to say close front door

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,199
    Rep Power
    244

    Re: Lexmark 734 Continuing to say close front door

    What type of switches are they: microswitches, photointerrupters, momentary contact switches ... ?

    If they're microswitches they are usually switching 24vdc from the PS. Do you have 24vdc?
    If they 're photointerrupters they usually get 5.0vdc from the controller board. Are you getting. 5vdc?
    If they 're push switches they'll also use 5.0vdc. Are you getting 5vdc?

    Does it change state when you operate the switch? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Indentured Servant 500+ Posts D_L_P's Avatar
    Join Date
    Oct 2009
    Posts
    854
    Rep Power
    28

    Re: Lexmark 734 Continuing to say close front door

    Sometimes those messages are not very accurate. Maybe the back door is open. IIRC one of those lexmarks has a door switch for the panel to access the main controller pcb.

    What happens if you cheat the door switches?


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here