Dislikes:
0
-
Lexmark X925 282.01 Error (ADF Jam)
The Control panel says that there is a paper jam in the ADF. I can't find this code anywhere in the manuals, I had written down 2 codes. 1 was 282.01 Error and 281.01 Error. Neither one I can find. I know it has something to do with the ADF but there is no sign on anything jammed or at the sensors. Any help would be very appreciated...
-
Re: Lexmark X925 282.01 Error (ADF Jam)
Both codes are for sensor jams, if you google them it will give you trouble shooting solutions.
-
Re: Lexmark X925 282.01 Error (ADF Jam)
best fix for those models is to push it out into traffic..... just saying...
-
Junior Member
- Rep Power
- 0
Re: Lexmark X925 282.01 Error (ADF Jam)
Hi. I have exactly the same ADF jam code 282.01 on all the time. A bit before it was 283.03 and it could cleared sometimes by powering off and on, but now it is 282.01 permanently. Printing of course works ok. I changed two ADF paper sensors, but it did not help at all. Service mode ADF sensor test shows (I think) pretty ok except I donīt know what Skew Sensor should show (1 or 0) and where is that sensor? Couldnīt find it from service manual or parts catalog.
Photo of sensor test attached.
Thank you all in advance.
Mane
Lex X925 ADF sensor test.jpg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks