Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jan 2016
    Topeka , KS
    Rep Power

    Angry Source Technologies ST9730 (Lexmark MS 810dn) fuser error code and paper jam

    First off I was unaware that Lexmark branded printers so here is the run down of the machines
    It is a Source Technologies ST 9730 which is a Lexmark MS810dn

    Machine throws error codes of 200.17 and 120.10

    I have replaced the fuser unit and fuser drive motor.
    Was going to replace the power supply to however I was sent a bad board (so I will try this again when new one comes in)
    when the machine powers up it shows a false paper jam under the pcu unit once you open and close front doors and tell the machine you cleared the jam it starts back up and throws a fuser error.

    Anyone else ran across this problem???
    Anyone else ever work on this brand?
    Help please....not much help from lexmark support at this time.


  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Jun 2015
    Lutherville, MD
    Rep Power

    Re: Source Technologies ST9730 (Lexmark MS 810dn) fuser error code and paper jam

    It looks like the end game on both of those codes is the Controller Board.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here