Not a Lexmark tech, trained on Ricoh/Savins, but boss got a deal on this machine. Machine is quite dusty, inside and out (fine orange dust, Texas maybe? Reminded me of the orange dust around Waco.). Quality is fine when printing out demo pages, but through the doc feeder or off the glass, colors are washed out (worst on the outside edges), with faint vertical white lines in the center 1/3 of the page. Cleaned the glass, no improvement. My next step on a Savin would be to remove the glass and clean the scanner, but it's not that simple on a Lexmark, not even close. I looked through the CQ flow chart, but nothing really matches my problem. Any suggestions? Thanks in advance.
Bookmarks