Results 1 to 5 of 5
  1. #1
    Field Supervisor 500+ Posts
    CX 410DE can I swap controller board from another machine ?


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    CX 410DE can I swap controller board from another machine ?

    I have a CX410de that the USB port is broken. I saw one on ebay for $88. (OK so I'm an idiot) It's for a friend of mine... Looking through here I am seeing that it may not work since the boards are married to the machine.... Any feedback would be helpfull... Thanks

  2. #2
    Senior member of CRS 2,500+ Posts
    CX 410DE can I swap controller board from another machine ?

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,368
    Rep Power
    102

    Re: CX 410DE can I swap controller board from another machine ?

    Quote Originally Posted by Doug James View Post
    I have a CX410de that the USB port is broken. I saw one on ebay for $88. (OK so I'm an idiot) It's for a friend of mine... Looking through here I am seeing that it may not work since the boards are married to the machine.... Any feedback would be helpfull... Thanks
    There are usually 2-3 boards that are married to the machine. Only one board at a time should be tried, and as long as the machine is powered up in diagnostic mode - you should be ok. As long as your tests in diag mode are ok, then this new board will take on the "married" state.
    "You can't trust your eyes, if your mind is out of focus" --

  3. #3
    Master Of The Obvious 10,000+ Posts
    CX 410DE can I swap controller board from another machine ?

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: CX 410DE can I swap controller board from another machine ?

    Quote Originally Posted by ZOOTECH View Post
    There are usually 2-3 boards that are married to the machine. Only one board at a time should be tried, and as long as the machine is powered up in diagnostic mode - you should be ok. As long as your tests in diag mode are ok, then this new board will take on the "married" state.
    I agree.

    I can't be certain if the used board will marry to the receiving machine. You've already spent the money ... find out if it will. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Field Supervisor 500+ Posts
    CX 410DE can I swap controller board from another machine ?


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Re: CX 410DE can I swap controller board from another machine ?

    I put the controller board in and turned on holding 3 & 6 the copier beeps once (No green light no lit touchscreen no fans) and that's it... The green LEDs are lit up on the board though. I put the old board back in it and it came right up to ready...

  5. #5
    Master Of The Obvious 10,000+ Posts
    CX 410DE can I swap controller board from another machine ?

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: CX 410DE can I swap controller board from another machine ?

    Repaired boards from Hytec and from the manufacturer have been initialized, that is, they have been wiped clean and prepared for the marrying process. Your used board probably did not have that procedure done. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here