Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Lexmark MX711de's with ADF misfeed issues
I have a few Lexmark MX711's that experience ADF misfeeds. The paper will stop on first page on the separator roller.
I have replaced all feed rollers and the ADF PCBA's with the same issues.
Has anyone else experienced this?
Jeff
sales@thetonerkings.com
-
Service Tech
- Rep Power
- 0
Re: Lexmark MX711de's with ADF misfeed issues
Hi, not quite sure what exactly you mean. Does it feed at all or is it intermittent? Never had that exact problem but there should be a clutch of some sort to the Sep roller but if that fails it would usually cause double feeding. If not then drive to the feed roller would seem a place to look. You say you’ve changed boards and rollers? Not sure if there are clutches in the roller assembly. Did you change only rollers or the assembly?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks