Lexmark CS7360DN Power Supply was dead

[Travis06]

Had a 3 month old machine that wouldn't turn on. Replaced power supply and it turns on and gets to the screen 256MB 900MHZ then reboots and goes through post again. Fuser never starts to warm up.

[JustManuals]

You sure about that model number?

[Silvertoast]

i would go with the system brd. just my opinion.

just for the hell of it. remove the fuser and power on and see what happens, a/keep resetting b/ come to ready screen but with fuser error

[Travis06]

New power supply got it to boot to clock screen and then reboot... After that, replaced system board and got it running.