Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Lance
    Guest

    Some nice to have Lexmark info

    Someone asked for some Lexmark info a while back...

    LaserPrinter 10R/10 Plus, 12 Series, 16 Series, Optra R L

    1. Turn the printer off
    2. Enter the Diagnostics Mode by holding down the READY and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST
    3. Select MAINTENANCE COUNT
    4. Select RESET to return the count to zero
    5. Press the RETURN button to return to the Diagnostics Mode main menu, then reset printer to return to normal mode

    Optra S, 2420/2450/2455/3455

    1. Turn the printer off
    2. Enter the Diagnostics Mode by holding down the GO and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. When ready, the display will read PRINT REGISTRATION
    3. Scroll to PRINTER SETUP and press the SELECT button
    4. Scroll to MAINTENANCE PAGE COUNT and press the SELECT button
    5. Scroll to RESET MAINTENANCE COUNT and press the SELECT button to reset the count to zero
    6. Press the RETURN button to return to the Diagnostics Mode main menu, then exit Diagnostics Mode to return to normal mode

    Optra T (all models)

    1. Turn the printer off
    2. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test, the display will read CONFIG MENU
    3. Press the right arrow side of the MENU button until MAINTENANCE PAGE COUNT is on the display
    4. Press the SELECT button. RESET should be displayed
    5. Press the SELECT button again to reset
    6. Press the RETURN button to return to the Configuration Menu and press the left arrow side of the MENU button to exit the Configuration Menu

    Optra W810

    1. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test the display will read CONFIG MENU
    2. Press the right arrow side of the MENU button until MAINT. COUNTER is displayed
    3. Press the SELECT button, then scroll to RESET TRANSFER or RESET FUSER and press the SELECT button again to reset
    4. Press the RETURN button to return to the Configuration Menu and press the left arrow side of the MENU button to exit the Configuration Menu

    Optra C710

    1. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test the display will read CONFIG MENU
    2. Press the MENU button right or left until RESET FUSER COUNT appears
    3. Press the SELECT button to reset the count

    Optra C720

    1. Enter the Diagnostic Menu for all resets by pressing the GO and RETURN buttons and turn the printer on
    2. Continue holding until PERFORMING SELF TEST is displayed
    3. Select RESET COUNTERS from the Diagnostic Menu
    4. Select the individual counter for reset and press the SELECT button

    Optra C750

    1. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test, the display will read CONFIG MENU
    2. Select individual reset for fuser or ITU kit

    Optra SC 1275/Color 1200

    1. Turn the printer off
    2. Hold down the GO and RETURN keys while powering on the printer until PERFORMING SELF TEST is displayed
    3. When REGISTRATION is displayed, press the right side of the MENU key six times until MAINTENANCE is displayed
    4. Press the SELECT button, and then press the right side of the menu button to scroll to 80 or 81 RESET
    5. Press the RETURN button until the display reads MAINTENANCE
    6. Press the right side of the MENU button until the display reads EXIT DIAGNOSTICS
    7. Press the SELECT button to return to the normal mode

  2. #2
    SuperTech
    Guest

    Re:Some nice to have Lexmark info

    Thanks, this will come in handy!

  3. #3
    lagerrogerthat
    Guest

    x64x MFP

    Config/Diagnostics/Maintenance Menu

    1. Turn Power Off
    2. Hold the 2 and 6 key on the operator panel.
    3. Turn Power On.
    4. Hold keys until Configuration menu is acheived.

    Handy for getting rid of the wiper message.

    Online Network Menu

    1. While powered on and booted up, press **976

    Handy for:
    --printing out the history of error conditions
    --resetting nvram for network card settings (only resets the active NIC)

  4. #4
    Copier Psychologist 250+ Posts Kopyrtek's Avatar
    Join Date
    Jan 2007
    Location
    Monroe,La.
    Posts
    407
    Rep Power
    39
    Thanks guys.Nice to have.

Similar Threads

  1. Toshiba Info
    By ToshibaGuy in forum Toshiba
    Replies: 1
    Last Post: 10-10-2010, 11:09 AM
  2. lexmark T642 service modes
    By geneseif in forum Lexmark
    Replies: 1
    Last Post: 06-13-2006, 08:37 AM
  3. Lexmark T610 Optra
    By Cheeto in forum Lexmark
    Replies: 3
    Last Post: 02-14-2006, 08:01 PM
  4. lexmark optra 1275
    By olde tech in forum Lexmark
    Replies: 1
    Last Post: 09-22-2005, 07:35 PM
  5. Lexmark color 1200
    By Garwin in forum Lexmark
    Replies: 0
    Last Post: 05-03-2005, 05:29 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here