Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 0
lexmark T-642
Have a problem with major toner dumping after performing pm, Have tried another set of charge and transfer rollers, new cartridge, and hv pcb. Problem occurs after about 15 pages.Thanks for replys
-
Looks like a bad contact between the cartridge and the machine. Maybe you should check for bend/broken/bad contact points.
-
Senior Tech
250+ Posts
- Rep Power
- 0
Checked contacts and connectors nothing bent and also changed out main pcb, Thanks for replys.
-
Senior Tech
250+ Posts
- Rep Power
- 0
rechecked connectors, reinstalled pcb's reinstalled all charge and transfer rollers still have the problem. Any other tips. Thanks
-
When you open the main door, is it leaking on the left side?
-
Sharp & HP Tech
100+ Posts
- Rep Power
- 31
This sounds like a HVPS issue. You need to check you PCR cable connection. I would change the PCR assembly attached to the top cover it connects directly into the HVPS. Also look for a bent contact. Sounds like a real mystery one.
If that does not work there's always the printhead, lol. I would not recommend replacing the printhead. You cannot use a used one and once you put it in it writes the serial number to it and it can only be associated with that machine. It is not worth changing unless you are sure it resolves an issue.
Good Luck
-
Trusted Tech
50+ Posts
- Rep Power
- 31
There are a lot of really bad Lexmark cartridges that just dump toner. Are you SURE its not a bad cartridge?
Also, update the Lexmark firmware, there are some HVPS issues in the early ones.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks