Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    Mexifornia
    Posts
    373
    Rep Power
    24

    Lexmark C780 100.01 error

    This is a new out of the box printer a customer bought at a garage sale and keeps throwing this code. The transfer belt is covered with toner (all colors). I removed the belt and transfer roller, cleaned them and still get code. Very unfamiliar with this unit. Is it worth repairing? any Ideas


  2. #2
    Service Manager 10,000+ Posts
    Lexmark C780 100.01 error

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: Lexmark C780 100.01 error

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



  3. #3
    Service Manager 250+ Posts Silvertoast's Avatar
    Join Date
    Feb 2010
    Location
    pensacola
    Posts
    270
    Rep Power
    19

    Re: Lexmark C780 100.01 error

    MORE THAN LIKE IT IS THE FIRST ONE ON THE LIST, ESPECIALLY SINCE YOU SAID IT WAS NEW OUT OF THE BOX

    1 Make sure all packing material is removed from the
    printer. The detensioner is located underneath the
    toner cartridges. Make sure the ITU detensioner is
    removed. Remove the detensioner by pulling up on the
    red handle on the right side of the ITU.
    Note: All the print cartridges must be removed to gain
    access to the detensioner packing material.
    Has all packing material been removed from the
    printer?
    Go to step 2 Remove any
    remaining
    packing material
    from the printer

    2 Check the ITU release lever for correct operation. The
    ITU release lever is the black lever located on the left
    upper side frame above the ITU opening and can be
    seen by opening and lowering the MPF assembly.
    When locked, the lever should be at the 6 o'clock
    position. When unlocked, it should be in a 3 o'clock
    position. Undue pressure is not required to operate the
    lever.
    Does the ITU release lever operate correctly?
    Go to step 3 Repair as
    necessary.

    3 Check the second transfer roll installation.
    Is it installed correctly?
    Go to step 4 Reinstall the
    second transfer
    roll.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here