Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    Sep 2013
    Posts
    5
    Rep Power
    0

    C920 - how to remove the 80 fuser life warning message

    Any help, will be appreciate

    I changed the fuser and the message did not dissapear.
    I reset the main count value.
    I reset factory defaults (basic)

    The message did not dissapear!!

    What can i do.

    Thanks


  2. #2
    Service Manager 10,000+ Posts
    C920 - how to remove the 80 fuser life warning message

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: C920 - how to remove the 80 fuser life warning message

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



  3. #3
    Technician Dijan's Avatar
    Join Date
    Jan 2012
    Posts
    16
    Rep Power
    0

    Re: C920 - how to remove the 80 fuser life warning message

    use 2-6 at startup! (V and arrow to the right)
    Restet maintenance


  4. #4
    Junior Member
    Join Date
    Sep 2013
    Posts
    5
    Rep Power
    0

    Re: C920 - how to remove the 80 fuser life warning message

    Quote Originally Posted by Dijan View Post
    use 2-6 at startup! (V and arrow to the right)
    Restet maintenance
    Excuse me ! What mean by «use 2-6 at startup

    Thanks


  5. #5
    Service Manager 250+ Posts Silvertoast's Avatar
    Join Date
    Feb 2010
    Location
    pensacola
    Posts
    270
    Rep Power
    19

    Re: C920 - how to remove the 80 fuser life warning message

    power off copier. hold down 2 and 6 and and turn power on (keep holding the 2 and 6) depending on your model it might be the down arrow and the right arrow you need to hold down)


  6. #6
    Technician Dijan's Avatar
    Join Date
    Jan 2012
    Posts
    16
    Rep Power
    0

    Re: C920 - how to remove the 80 fuser life warning message

    Quote Originally Posted by Silvertoast View Post
    power off copier. hold down 2 and 6 and and turn power on (keep holding the 2 and 6) depending on your model it might be the down arrow and the right arrow you need to hold down)


    To enter the configuration menu, POR the printer holdingdown the V key and the RIGHT key until the operator
    panel displays “Performing Self Test”. The configuration menu can be navigated by pressing the UP and
    DOWN keys, and then pressing the key to select the item.


  7. #7
    Junior Member
    Join Date
    Sep 2013
    Posts
    5
    Rep Power
    0

    Re: C920 - how to remove the 80 fuser life warning message

    Quote Originally Posted by Dijan View Post
    To enter the configuration menu, POR the printer holdingdown the V key and the RIGHT key until the operator
    panel displays “Performing Self Test”. The configuration menu can be navigated by pressing the UP and
    DOWN keys, and then pressing the key to select the item.
    Thanks for the answer.

    I knew this configuration Menu and nothing about FUSER COUNTER RESET.

    In the Service Manual Lexmark C920 page 78LX-5056-C920-Manual page 78_Page_078.jpg

    It's said «Replace the fuser and, if necessary,reset the printer internal counter for
    the fuser.»


    I reset the main counter in the CONFIGURATION MENU .
    This is the only counter in the CONFIGURATION MENU .

    Last edited by lavoiejr; 10-12-2013 at 01:05 AM.

  8. #8
    Junior Member
    Join Date
    Sep 2013
    Posts
    5
    Rep Power
    0

    Re: C920 - how to remove the 80 fuser life warning message

    Quote Originally Posted by Silvertoast View Post
    power off copier. hold down 2 and 6 and and turn power on (keep holding the 2 and 6) depending on your model it might be the down arrow and the right arrow you need to hold down)
    I have accessed a new menu WITH 2 AND 6


    1. ALIGMENT MENU
      • AUTO ALIGN TEST
      • CYAN
      • YELLOW
      • MAGENTA

    2. PRINT TEST
    3. HARDWARE TEST
    4. EVENT LOG
    5. DEVELOPMENT MENU
      • BOOT DEVICE
      • AUTO NOTIFY
      • DEBUG CONTROL
      • DEBUG PORT
      • PRINT HISTORY

    6. DEFAULT
      • US
      • NON US

    7. LIGHT QUANTITY
    8. PAGE COUNT
      • PRT COLOR PG COUNT
      • PRT MONO PG COUNT
      • PERM PAGE COUNT

    9. SERIAL NUMBER
    10. MODEL NUMBER
    11. CONFIGURATION ID
    12. RESET COLOR CAL


    Nothing help me in this menu, I have tried and browsed throughout the menu.

    Thanks for this new menu!!!


  9. #9
    Junior Member
    Join Date
    Sep 2013
    Posts
    5
    Rep Power
    0

    Re: C920 - how to remove the 80 fuser life warning message

    Quote Originally Posted by lavoiejr View Post
    thanks for the answer.

    I knew this configuration menu and nothing about fuser counter reset.

    In the service manual lexmark c920 page 78LX-5056-C920-Manual page 78_Page_078.jpg

    it's said «replace the fuser and, if necessary,reset the printer internal counter for
    the fuser.»


    i reset the main counter in the configuration menu .
    This is the only counter in the configuration menu .
    configuration menu

    1. maint cnt value
    2. reset maint cnt
    3. black only mode
      • on
      • off

    4. prt quality pgs
    5. color trapping
    6. panel menu
      • disable
      • enable

    7. ppds emulation
      • deactivate
      • activate

    8. demo mode
    9. factory default
      • restor base
      • restor network

    10. energy consum
      • on
      • off

    11. event log
    12. auto align adj
    13. auto color adj
    14. paper prompts
      • auto

    15. env prompts
      • auto

    16. font sharpening
    17. standby disabled
    18. exit configuration



  10. #10
    submairner
    Guest

    Re: C920 - how to remove the 80 fuser life warning message

    the fuser as well as the transfer belt have fuseable links in them. if you are using a new fuser from Lexmark contact tech support for replacement if its a refurbished fuser odds are that the link wasn't replaced durning build up.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here