Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Master Of The Obvious 10,000+ Posts
    Lexmark C736n  "Close Front Door" message

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,408
    Rep Power
    249

    Lexmark C736n "Close Front Door" message

    There are two interlocks along the right front of the primary transfer/drum units assembly. The first is a small black plastic feature that engages with a slot in the right hand rail. The second is a microswitch. Both clear at least momentarily. Both switches test fine ... then close front door message again. Has anyone seen this? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  2. #2
    Service Manager 10,000+ Posts
    Lexmark C736n  "Close Front Door" message

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    141

    Thumbs up Re: Lexmark C736n "Close Front Door" message

    Cat - If you want the service manual for this machine, just shoot me an email and I'll send it along at no charge.

    Best Regards;
    Paul



  3. #3
    Service Manager 250+ Posts Silvertoast's Avatar
    Join Date
    Feb 2010
    Location
    pensacola
    Posts
    270
    Rep Power
    19

    Re: Lexmark C736n "Close Front Door" message

    2 things. have seen one of these do this once after the main drive was replaced. it wasnt installed correctly and when it tried to start up it would say to close the front door. dont remember exact details but after removing and reinstalling a couple of time finally figured out what i was doin wrong

    the other is that it looks like all the door switches run straight to the sys board. so that could be the issue also if not the later.


  4. #4
    Master Of The Obvious 10,000+ Posts
    Lexmark C736n  "Close Front Door" message

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,408
    Rep Power
    249

    Re: Lexmark C736n "Close Front Door" message

    Quote Originally Posted by JustManuals.com View Post
    Cat - If you want the service manual for this machine, just shoot me an email and I'll send it along at no charge.

    Best Regards;
    Paul
    Thanks Paul. Much appreciated.

    Quote Originally Posted by Silvertoast View Post
    2 things. have seen one of these do this once after the main drive was replaced. it wasn't installed correctly and when it tried to start up it would say to close the front door. don't remember exact details but after removing and reinstalling a couple of time finally figured out what i was doing wrong.

    the other is that it looks like all the door switches run straight to the sys board. so that could be the issue also if not the later.
    I haven't dug in quite that far yet. Thanks for the comments though.

    When I press the microswitch I can hear a fan shift to high speed, and a drive motor to come on, so I can be fairly certain that the switch itself is not the issue. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here