Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Field Supervisor 500+ Posts
    Lexmark X658de, fuser error


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    855
    Rep Power
    35

    Lexmark X658de, fuser error

    I posted about this before having an intermittent fuser error
    code, 924.01. Manual states it is a
    thermistor.Someone suggested to replace the fuser
    even though it only has 30k clicks on machine. I
    went ahead and replaced the fuser. Still have error
    code. I suspect pwr supply or controller? Anyone
    have to replace either of these boards? Or any
    other suggestions greatly appreciated.

    Thanks in advance


  2. #2
    Junior Member
    Join Date
    Sep 2014
    Location
    Calgary Alberta
    Posts
    4
    Rep Power
    0

    Re: Lexmark X658de, fuser error

    Quote Originally Posted by copyman View Post
    I posted about this before having an intermittent fuser error
    code, 924.01. Manual states it is a
    thermistor.Someone suggested to replace the fuser
    even though it only has 30k clicks on machine. I
    went ahead and replaced the fuser. Still have error
    code. I suspect pwr supply or controller? Anyone
    have to replace either of these boards? Or any
    other suggestions greatly appreciated.

    Thanks in advance
    Go LVPS if you have already replaced the fuser. OR you can check the pins on the LVPS to the System board. I just had one where the pins were not properly connecting to the system board, I bent them around a tiny bit and the fuser error was gone. Try pins first, replace LVPS second.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here