I bought the service manual and still can't figure out how to rest the fuser and transfer belt counters. Anyone know how?
yormets
I bought the service manual and still can't figure out how to rest the fuser and transfer belt counters. Anyone know how?
yormets
Have you looked in Service Mode 26? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Got the ADF to reset. Still working on the transfer belt reset.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
That's where I am at. See only the radf reset.
Most likely fuser and itb are chipped or fused. Several Lexmark models are done this way with no manual reset.
Bookmarks