Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2008
    Location
    Seattle
    Posts
    62
    Rep Power
    19

    Lexmark XS796de doc feeder adjustment

    I'm trying to correct a side to side image shift on a Lexmark XS796de. It only occurs when the original is fed through the document feeder. Does anyone know the df centering adjustment? Lead edge timing is fine but I would like to know all the adjustments. The problem happens on single sided and duplex. On 2:2 duplex the up facing side has the shift but the side facing down in the df comes out properly centered. On 1:2 duplex both sides are shifted.

    Firmware has been updated. I looked in 26 and 36 mode and didn't find the adjustment. There must be an adjustment mode I don't know about or a calibration procedure.

    Thanks


  2. #2
    Field Supervisor 1,000+ Posts subaro's Avatar
    Join Date
    Oct 2010
    Posts
    1,129
    Rep Power
    30

    Re: Lexmark XS796de doc feeder adjustment


  3. #3
    Junior Member
    Join Date
    Aug 2012
    Posts
    5
    Rep Power
    0

    Smile Re: Lexmark XS796de doc feeder adjustment

    Quote Originally Posted by nathicana View Post
    I'm trying to correct a side to side image shift on a Lexmark XS796de. It only occurs when the original is fed through the document feeder. Does anyone know the df centering adjustment? Lead edge timing is fine but I would like to know all the adjustments. The problem happens on single sided and duplex. On 2:2 duplex the up facing side has the shift but the side facing down in the df comes out properly centered. On 1:2 duplex both sides are shifted.

    Firmware has been updated. I looked in 26 and 36 mode and didn't find the adjustment. There must be an adjustment mode I don't know about or a calibration procedure.

    Thanks
    Enter 2 and 6 Configuration mode

    Go to Scanner Manual Registration

    Print Quick Print test and then use that page to do the copy quick test

    You will then need to make adjustments through the ADF FRONT menu.

    Use horizontal adjust to get the image centerd.

    Hope this helps


  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2008
    Location
    Seattle
    Posts
    62
    Rep Power
    19

    Re: Lexmark XS796de doc feeder adjustment

    Quote Originally Posted by brodstol View Post
    Enter 2 and 6 Configuration mode

    Go to Scanner Manual Registration

    Print Quick Print test and then use that page to do the copy quick test

    You will then need to make adjustments through the ADF FRONT menu.

    Use horizontal adjust to get the image centerd.

    Hope this helps

    Thank you this adjustment works.


  5. #5
    Senior Tech 100+ Posts redneckstylin's Avatar
    Join Date
    Sep 2011
    Location
    prince george
    Posts
    170
    Rep Power
    14

    Re: Lexmark XS796de doc feeder adjustment

    manual on its way sir


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here