Tab Content
No Recent Activity

3 Visitor Messages

  1. Hi, you replied to a post i made back in may re: replacing the pico fuse in a bizhub 352 fusing unit. I bought the fuse and replaced it and turn on the machine and it just keeps saying warming up. did i replace it wrong. I am not sure if i didn't do something right. The unit is warm to the touch... Any imput would be appreciated. thanks epadvertising
  2. Yes,

    I've dabbled with other brands as things come up and once replaced a roller on a transfer machine in my mate's Tattoo shop.

    I work on Xerox Colour Specifically.

    Plenty of work to do even in such a narrow field.
  3. Hi,

    My name's Pete montgomery.
    Just saying G'day.

    I'm an Independent Xerox Tech In Sydney Australia.

    7 years at Xerox and 4 years self employed.

    I've just signed up here and found that you're a real contributor to this site so I decided to "Befriend" you.


    Pete
Showing Visitor Messages 1 to 3 of 3
About 8050

Basic Information

About 8050
Country:
United States
Where are you from (City, State):
New York
What was the first machine you worked on:
Minolta
Last machine you were formally trained on:
Sharp
Gender:
Male

Statistics


Total Posts
Total Posts
88
Posts Per Day
0.02
Visitor Messages
Total Messages
3
Most Recent Message
03-05-2010
General Information
Last Activity
08-27-2013
Join Date
02-20-2009
Referrals
0

1 Friend

  1. Peter Montgomery Peter Montgomery is offline

    Technician

    Peter Montgomery
Showing Friends 1 to 1 of 1
No results to show...