aabarnes1
Field Supervisor
500+ Posts

The Minolta 450Z was a good box. I had a ton of them I almost never seen because they ran so well. And outstanding solid fill, even to this day.

You might look up the dickhead IT guy that changed it to begin with. If you tried supervisor>no password and that didn't work, I don't know what else...

The gear you need is on this list, and I have never dealt with this company. WA612

Bingo!

Glad it worked for you. If I helped you out on this one, I sure could use some more green rep blocks:D

Color registration is off as well as needing the LD shield glasses cleaned (the white lines). The magenta streak may indicate a problem with the PCU...

A product called D-ink. Soak the sticker for a couple minutes and it comes right off. An absolute necessity if you work on ink duplicators like a...

Thanks for the replies. You all have a great day.

It's been my experience that the recycling tubes get clogged enough to stop continuous rotation of the disk causing the code. Pull the tubes out and...

I believe that it can only be changed once, and then your stuck with it. SP 5045-001, set to "1"

I always use floss on my gums instead of sandpaper. It's a lot less painful:D

Look, Dude. The machine is probably set to auto restart in the event of an SC code. Check the SMC. The codes will be logged. Troubleshoot from there.

Sounds like a stupid human trick like they were copying with the black and white button selected. Probably will be an easy fix. Check out the things...

It does look like a pcu problem, but since it disappeared and returned you might check out the transfer cleaning unit also.

It doesn't work like that.

Looks like some dickhead pulled the toner bottle out with the cap still in the supply unit and made a little mess. Then, in a fit of idiotic rage...

This is excellent advice. I've had this happen more than once.

Thanks for the follow up, and glad you got it fixed. Probably a good thing considering advice on the fix was a little scarce.

There appears to be something wrong with the transfer unit itself, like the cleaning blade mounting bracket or something in that area. I don't think...