View Profile: aborad - Copytechnet.com

9 Hours Ago

blackcat4866 replied to a thread [Error Code] c6102 454e in Konica Minolta

I've never seen that sensor. The description sounds like the photointerrupter that tracks the movement of the white reference 1/2 round roller with...

8 replies | 107 view(s)

10 Hours Ago

blackcat4866 replied to a thread MX4501 locks up on 2nd job in Sharp

That was my thought too. I've had to change page memory back in my Sharp days. That shows how old it is: I was trained on that one. =^..^=

5 replies | 78 view(s)

10 Hours Ago

blackcat4866 replied to a thread [Error Code] c6102 454e in Konica Minolta

Tell me how similar this sounds: I had a bizhub 808 that gave gray copies through the DF (because the scanner stopped 10mm from it's usual slide...

8 replies | 107 view(s)

15 Hours Ago

blackcat4866 replied to a thread [Misc] Copyright Error Message when Copying a document the customer has rights too in Konica Minolta

There 's more to it than just that. It must resemble some prohibited original in design and or color. =^..^=

3 replies | 149 view(s)

15 Hours Ago

blackcat4866 replied to a thread MPC401 Trapeziod problem in Ricoh, Savin, Gestetner, Lanier

I suspect that the scanner frame may be bent, front leaning on the corner. Are internal prints and prints of electronic documents square? I suspect...

6 replies | 162 view(s)

2 Days Ago

blackcat4866 replied to a thread Toshiba ES 455 Upper drawer issue in Toshiba

There's a bulletin that offers modified loop values that seem to work better than the defaults found in the manual. (You did look in the manual,...

2 replies | 179 view(s)

3 Days Ago

blackcat4866 replied to a thread Toshiba 456 in Toshiba

You're going to have to figure out how to get the jam code, if you really want help. =^..^=

4 replies | 214 view(s)

3 Days Ago

blackcat4866 replied to a thread HP M72630dn is it copier or laser printer? in Other Copier Brands

Please keep in mind that dealer specifications are always optimistic in the extreme. If you were to run 40K per month you would destroy it in less...

15 replies | 451 view(s)

3 Days Ago

blackcat4866 replied to a thread [CQ] Toshiba Estudio 757 in Toshiba

I had a 557 recently that turned out to be wrong toner. It was a Toshiba tube, but I suspect the customer spoon fed it something else. Like most...

9 replies | 366 view(s)

3 Days Ago

blackcat4866 replied to a thread Toshiba 456 in Toshiba

A jam code might be good to know. =^..^=

4 replies | 214 view(s)

4 Days Ago

blackcat4866 replied to a thread Canon iR3300 Scan settings in Canon

Did you notice the image quality? And you're not very concerned about that? =^..^=

6 replies | 416 view(s)

4 Days Ago

blackcat4866 replied to a thread e-Studio 456-457, copy quality issues... in Toshiba

Same here: accidentally leave one of the connectors undone (upper or lower, it makes no difference). The developer sets properly and image is...

5 replies | 293 view(s)

4 Days Ago

blackcat4866 replied to a thread [CQ] Dark magenta line exactly same on 2 SPC440 and 1 SPC430 printers in Ricoh, Savin, Gestetner, Lanier

Just out of curiosity: Does this defect appear on all paper sizes, all media types, all trays? Does the defect reduce/enlarge when the electronic...

14 replies | 809 view(s)

4 Days Ago

blackcat4866 replied to a thread Konica c284 toner problem in Konica Minolta

It is not uncommon to have these white bushings/seals on the hopper pack with toner and stall the toner drive. If you remove the engine cove and...

9 replies | 339 view(s)

4 Days Ago

blackcat4866 replied to a thread bh 4750 in Konica Minolta

I suspect the printer is getting some sort of not-print data. The easy diagnosis is to change the IP of the printer to another open IP. Change one of...

8 replies | 314 view(s)

4 Days Ago

blackcat4866 replied to a thread [CQ] Toshiba Estudio 757 in Toshiba

Did the developer balance between 234 and 246? =^..^=

9 replies | 366 view(s)

4 Days Ago

blackcat4866 replied to a thread e-Studio 456-457, copy quality issues... in Toshiba

You cover a lot of ground in this thread. Yes, I've seen hot spots in the lamps cause offsetting and eventually blistering of the Teflon. Yes,...

5 replies | 293 view(s)

5 Days Ago

blackcat4866 started a thread bizhub 808 with LU-303: J1501 ... then J17-20 in Konica Minolta

OK, so go ahead and laugh. I found the LU-303 external LCF with three pages somehow crammed in the outlet. Per the management list, the jams had...

2 replies | 188 view(s)

5 Days Ago

blackcat4866 replied to a thread [Misc] Bizhub C224e Unknown Issue in Konica Minolta

I've seen a black screen as a result of bad page memory. Once the page memory was changed I got other errors that led me to the PRCB (when I could...

29 replies | 1101 view(s)

5 Days Ago

blackcat4866 replied to a thread Estudio 5015ac cyan banding and toner bank in Toshiba

I'd sure like to see an image quality sample. I think that I would concentrate on development. Also look at the grid tensioner. They're know to...

1 replies | 192 view(s)

5 Days Ago

blackcat4866 replied to a thread online pharmacy on Copytechnet? in Rants, Raves, and Everything Else

You are being spammed. =^..^=

3 replies | 386 view(s)

5 Days Ago

blackcat4866 replied to a thread wonders of the egyptain customers inventions😂 in Rants, Raves, and Everything Else

Now I have to contribute a story: I took a call on a Mita DC-2055 if anybody remembers what that looks like. The call was for 1/2 copies, and...

21 replies | 1100 view(s)

5 Days Ago

blackcat4866 replied to a thread Taskalfa 3550ci paper jam in Kyocera Mita, Copystar

It would help to know the jam codes. Any errors stored? =^..^=

1 replies | 200 view(s)

5 Days Ago

blackcat4866 replied to a thread [CQ] Toshiba Estudio 757 in Toshiba

May we see an image quality sample? Did you run 05-2000? =^..^=

9 replies | 366 view(s)

6 Days Ago

blackcat4866 replied to a thread wonders of the egyptain customers inventions😂 in Rants, Raves, and Everything Else

Does brown leather have the proper electrical properties? I do not think that a neoprene blade could clean it adequately. This couldn't be true....

21 replies | 1100 view(s)

1 Week Ago

blackcat4866 replied to a thread IPF8300 keeps replenishing with ink for 1 hour in Canon

Ink Owl branded ink cartridges have caused this for me. The explanation I got was air leaking into the cartridges. =^..^=

8 replies | 4669 view(s)

1 Week Ago

blackcat4866 replied to a thread [Misc] HP 602 usage page and configeration page different in HP

I believe the usage page is based on LTR (that's 0.060264 m2) or A4 (that's 0.0625 m2) sized images depending on your area. That will more accurately...

4 replies | 290 view(s)

1 Week Ago

blackcat4866 replied to a thread [Error Code] toshiba e-studio 2050c error f520 in Toshiba

Formatting the drive, then re-loading the firmware will fix it. =^..^=

2 replies | 242 view(s)

1 Week Ago

blackcat4866 replied to a thread TASKalfa 3051ci error C2840 in Kyocera Mita, Copystar

Make sure that the 32pin connector is entirely seated ... no bent pins. =^..^=

6 replies | 2111 view(s)

1 Week Ago

blackcat4866 replied to a thread microsoft edge pdf print error in Kyocera Mita, Copystar

I recommended that my enduser download the doc, then open it in Adobe, Foxit, or just about any PDF reader. Then it prints. =^..^=

14 replies | 657 view(s)

aborad
Trusted Tech
50+ Posts

Mini Statistics

More 1 Friend

blackcat4866

Recent Visitors

Basic Information

About aborad

Statistics

Total Posts

General Information

1 Friend

blackcat4866

aborad Trusted Tech 50+ Posts

Mini Statistics

More 1 Friend

blackcat4866

Recent Visitors

Basic Information

About aborad

Statistics

Total Posts

General Information

1 Friend

blackcat4866

aborad
Trusted Tech
50+ Posts