No Recent Activity

2 Visitor Messages

  1. View Conversation
    Now I know your secret identity!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  2. As one poster suggested turn off the image control and run a skyshot (put a piece of paper so it is not a total black page) and check for errors. I am willing to bet that it will not be solid but may have diagonal light spots through it. If so then it is time for a developer change or the toner supply is blocked up. I would also check and clean the sensors on this. Do not forget to reset the error counters or it will not go away.
    Check the pm counters as well, as other items may be due soon and it would be good just to do it and be done with it.

    I am not trained but this is a code that seems to happen on most Toshiba's and this is the standard check I do and it usually takes care of it.
Showing Visitor Messages 1 to 2 of 2
About Calcucatus

Basic Information

About Calcucatus
Real Name:
Howard Peshkie
Country:
United States
Where are you from (City, State):
Tulsa, ok
Biography:
Former leader of a failed dictatorship
Interests:
Carpeting Rhode Island.
What Year Did You Start in this Industry:
1980
Most Hated Brand:
Toshiba
What was the first machine you worked on:
Xerox 410
Last machine you were formally trained on:
TA 550c
Gender:
Male

Statistics


Total Posts
Total Posts
16
Posts Per Day
0.00
Visitor Messages
Total Messages
2
Most Recent Message
08-05-2010
General Information
Last Activity
08-29-2018
Join Date
03-25-2010
Referrals
0
No results to show...