Tab Content
No Recent Activity

10 Visitor Messages

  1. hi dear friend,
    i have a problem and i want to use your experience and so much thanks.
    i have estudio 45 with GL-1010 controller in case at back side the copier.i connect a monitor&keyboard and remove windows NT that was installed on controller.now when i turn on copier show this message"controller is starting,please wait" , and stop.
    when i installed windows NT again,i couldn't install printer within.do i install printer such as another systems from printer and faxes then share it in network?
    is there a site that i can download recovery disk for it?
    before i remove the windows,copier give me a check print with IP address and Etc. but now it doesn't give me check print.
    Please help me and so thanks for your help.
    sincerely yours...
    postalmail742@yahoo.com
  2. hi dear friend,
    i have a problem and i want to use your experience and so much thanks.
    i have estudio 45 with GL-1010 controller in case at back side the copier.i connect a monitor&keyboard and remove windows NT that was installed on controller.now when i turn on copier show this message"controller is starting,please wait" , and stop.
    when i installed windows NT again,i couldn't install printer within.do i install printer such as another systems from printer and faxes then share it in network?
    is there a site that i can download recovery disk for it?
    before i remove the windows,copier give me a check print with IP address and Etc. but now it doesn't give me check print.
    Please help me and so thanks for your help.
    sincerely yours...
    postalmail742@yahoo.com
  3. hi dear friend,
    i have a problem and i want to use your experience and so much thanks.
    i have estudio 45 with GL-1010 controller in case at back side the copier.i connect a monitor&keyboard and remove windows NT that was installed on controller.now when i turn on copier show this message"controller is starting,please wait" , and stop.
    when i installed windows NT again,i couldn't install printer within.do i install printer such as another systems from printer and faxes then share it in network?
    is there a site that i can download recovery disk for it?
    before i remove the windows,copier give me a check print with IP address and Etc. but now it doesn't give me check print.
    Please help me and so thanks for your help.
    sincerely yours...
    postalmail742@yahoo.com
  4. hi dear friend,
    i have a problem and i want to use your experience and so much thanks.
    i have estudio 45 with GL-1010 controller in case at back side the copier.i connect a monitor&keyboard and remove windows NT that was installed on controller.now when i turn on copier show this message"controller is starting,please wait" , and stop.
    when i installed windows NT again,i couldn't install printer within.do i install printer such as another systems from printer and faxes then share it in network?
    is there a site that i can download recovery disk for it?
    before i remove the windows,copier give me a check print with IP address and Etc. but now it doesn't give me check print.
    Please help me and so thanks for your help.
    sincerely yours...
  5. Hi Budd,

    My name's Pete montgomery.
    Just saying G'day.

    I'm an Independent Xerox Tech In Sydney Australia.

    7 years at Xerox and 4 years self employed.

    I've just signed up here and see that you're a real contributor to this site so I decided to "Befriend" you.

    Pete.
  6. Hi! just want to know if you have sm for toshiba e studio 25, 35, 45? Is it okay if I request a copy?


    ed.dantes@ymail.com

    Than you very much.
  7. error h4 in sharp ar 122 en
  8. hi
    i need a studio 45 service manual and i cant enter the http://www.copierprofessionals.com/p...embers/030114/
    can you help me (abbasjoodaki@yahoo.com)
  9. hi
    i need a studio 45 service manual and i cant enter the http://www.copierprofessionals.com/p...embers/030114/
    can you help me
  10. View Conversation
    Hi copyguy5!

    why can't i enter the http://www.copierprofessionals.com web?

    help me
    =======================================
    You can find some of the manuals you need at:
    http://www.copierprofessionals.com/p...embers/030114/

    Hope this FREE service helps.
Showing Visitor Messages 1 to 10 of 10
About copyguy5

Basic Information

About copyguy5
Real Name:
Budd Fischer
Where are you from (City, State):
Algonquin, Illinois
What Year Did You Start in this Industry:
1985
Gender:
Male

Statistics


Total Posts
Total Posts
94
Posts Per Day
0.02
Visitor Messages
Total Messages
10
Most Recent Message
09-24-2010
General Information
Last Activity
11-17-2007
Join Date
09-03-2006
Referrals
0
No results to show...