View Profile: CraigW - Copytechnet.com

5 Hours Ago

allan replied to a thread Konica c360 black lines in Konica Minolta

Yes but they don't drop out of thin air, need to go get one somewhere...

4 replies | 106 view(s)

5 Hours Ago

allan replied to a thread konica minolta 601 ip address problem in Konica Minolta

Do you mean the CF-Card on the side?

2 replies | 70 view(s)

12 Hours Ago

allan replied to a thread [Misc] ~ Konica Drivers - Drop-Down Boxes Getting Cut Off ~ in Konica Minolta

Take a screen shot

3 replies | 74 view(s)

12 Hours Ago

allan replied to a thread Scan error bizhub 454 in Konica Minolta

Did you check the job history details?

6 replies | 97 view(s)

12 Hours Ago

allan replied to a thread [Dead] Bizhub C454 boy printing (blank pages) in Konica Minolta

I have seen that machines will error out if the mirror does not spin, but seen a couple of cases where no error will occur if no data gets sent or...

11 replies | 329 view(s)

13 Hours Ago

allan replied to a thread Konica c360 black lines in Konica Minolta

Yes there is... REMEMBER TO CHANGE IT BACK BEFORE INSTALLING A NEW DRUM. >Image process adjustment> Background adjustment. The prints will be a...

4 replies | 106 view(s)

3 Days Ago

allan replied to a thread BH-C-220, C-2553 in Konica Minolta

No really found developer on there hence the HTF...

14 replies | 803 view(s)

6 Days Ago

allan replied to a thread [Misc] Lock document being scanned until completed in Konica Minolta

Webdav?

16 replies | 431 view(s)

6 Days Ago

allan replied to a thread BH-C-220, C-2553 in Konica Minolta

I got lazy, i just use the back of my screwdriver to give it a couple of good wacks. What gets me is HTF does developer get onto the magnets of the...

14 replies | 803 view(s)

1 Week Ago

allan replied to a thread bizhub c450 display in japanese language? in Konica Minolta

ファックのマニュアルを読む

9 replies | 243 view(s)

1 Week Ago

allan replied to a thread BH-C-220, C-2553 in Konica Minolta

The mechanism inside the hopper is a bit silly on these machines. The magnet reed switch combo with the flimsy aluminum plate in there makes for some...

14 replies | 803 view(s)

2 Weeks Ago

allan replied to a thread Usefull Cheep/free software used in Connectivity

Note++ and Cyberduck

15 replies | 651 view(s)

2 Weeks Ago

allan replied to a thread [Error Code] Bizhub pro 951 in Konica Minolta

Switch 3 bit 1 to 0 not 1.

4 replies | 211 view(s)

2 Weeks Ago

allan replied to a thread Bizhub 751 jamming 1701 up to 5 times in a row. in Konica Minolta

I would strip of the unit(bypass) and check and clean the sensor, its got one sensor common to both paths. Next would be the registration unit check...

8 replies | 211 view(s)

2 Weeks Ago

allan replied to a thread [Misc] C364e Stabalizer NG in Konica Minolta

Thanks Habik. As i expected the toner in the developer of that fongkong dev packets was not ok. After a week the i managed to do gradation and...

13 replies | 558 view(s)

3 Weeks Ago

allan replied to a thread Bizhub C360 the following functions can not be used because the scanner in Konica Minolta

Ok great you know whats up. What was the initial concern about the NVram? Check for ICP's.

22 replies | 622 view(s)

3 Weeks Ago

allan replied to a thread Bizhub C360 the following functions can not be used because the scanner in Konica Minolta

Alrighty then. First goto Service mode > Counter > Service Call History Data. Look for sc codes there. Then goto Counter > Section Service Call....

22 replies | 622 view(s)

3 Weeks Ago

allan replied to a thread [Misc] C360 printing speed. in Konica Minolta

Have you tried different drivers. If you are using PS try PCL. Put the job on a thumb drive and plug it in on the machine. Is it a 250Mb file or...

15 replies | 629 view(s)

3 Weeks Ago

allan replied to a thread [Dead] Bizhub 751 New cf Card in Konica Minolta

You can copy and paste from one card to another. But you could find yourself locked out of admin and service mode.

3 replies | 169 view(s)

3 Weeks Ago

allan replied to a thread C308 fine pitch variations (2 mm or so approx) in Konica Minolta

Silly question did you check for remaining packaging? Did you reinstall the transfer belt and all other units?

9 replies | 283 view(s)

3 Weeks Ago

allan replied to a thread [Dead] Bizhub 751 New cf Card in Konica Minolta

You need the CF card recovery stuff. Do not try to format the card or make sure you have the correct format tool. Delete, copy and paste only. ...

3 replies | 169 view(s)

3 Weeks Ago

allan replied to a thread [Misc] C364e Stabalizer NG in Konica Minolta

:rolleyes:Mining for more info... Yes its opened. i can see the IDC voltages while trying to stabilize. With B/W i have lots of...

13 replies | 558 view(s)

3 Weeks Ago

allan replied to a thread [Misc] C364e Stabalizer NG in Konica Minolta

Will do that is i get there again. Thanks :)

13 replies | 558 view(s)

3 Weeks Ago

allan replied to a thread [Misc] C364e Stabalizer NG in Konica Minolta

Drum are new. But... Developer is questionable. 3rd party stuff refill and reset. Was waiting for some one to question the consumables. The...

13 replies | 558 view(s)

3 Weeks Ago

allan started a thread [Misc] C364e Stabalizer NG in Konica Minolta

Hi guys. Have this machine that gives IDC front and rear error and will not run gradation but seems to do color registration fine (no P-21). I...

13 replies | 558 view(s)

3 Weeks Ago

allan replied to a thread [Misc] Emptying Waste Toner in Konica Minolta

I just ask where is the kitchenette and for a spare refuse bag. Use a brush and a syringe bulb to clean it. It good practice to remove the lens and...

21 replies | 1316 view(s)

3 Weeks Ago

allan replied to a thread Bizhub C224 (Only black and white printing is possible) in Konica Minolta

Jip had that today. All switches and setting was done and the machine just stopped printing color.

12 replies | 547 view(s)

4 Weeks Ago

allan replied to a thread mono 554e cd33c in Konica Minolta

Read under the code description how to do a manual backup. Just do that for the love of it to see what happens. Other wise the machine does that...

5 replies | 147 view(s)

4 Weeks Ago

allan replied to a thread mono 554e cd33c in Konica Minolta

Its like a checksum test it fails when checking the NV memory (SSD) data. So to me that means the hardware is ok but the data on it is corrupted or...

5 replies | 147 view(s)

4 Weeks Ago

allan replied to a thread minolta bizhub c280 color copy make blue or red lines in Konica Minolta

Who coined the term "lines of shame"?

11 replies | 3327 view(s)

CraigW
Senior Tech
250+ Posts

Mini Statistics

More 1 Friend

allan

Recent Visitors

1 Visitor Messages

Basic Information

About CraigW

Statistics

Total Posts

Visitor Messages

General Information

1 Friend

allan

08-02-2017

08-01-2017

CraigW Senior Tech 250+ Posts

Mini Statistics

More 1 Friend

allan

Recent Visitors

1 Visitor Messages

Basic Information

About CraigW

Statistics

Total Posts

Visitor Messages

General Information

1 Friend

allan

08-02-2017

08-01-2017

CraigW
Senior Tech
250+ Posts