hi first post for a while. any help appreciated. i have been fitting a fax option to a konica c353. everything fitted correctly performed the fax initialisation and set the fax target to GB, when setup is performed the machine comes to ready. Then a min later throws up an error code c-b116, in the manual this says there is no communication between the machine and the fax board. does antone know if i have missed something on the setup or i have a faulty fax board. i know the fax board is connected properly the lights on the fax pwb light up, yet still this error code keeps
hi first post for a while. any help appreciated. i have been fitting a fax option to a konica c353. everything fitted correctly performed the fax initialisation and set the fax target to GB, when setup is performed the machine comes to ready. Then a min later throws up an error code c-b116, in the manual this says there is no communication between the machine and the fax board. does antone know if i have missed something on the setup or i have a faulty fax board. i know the fax board is connected properly the lights on the fax pwb light up, yet still this error code keeps appearing. many thx in advance.
hi could somebody help me please. ihave a ricoh mpc4500 that keeps saying change toner i have replaced the pump unblocked the pipe if you force the toner through it gets to the unit in question. it seems to be alright then when the customer does a large run. it then flags up change toner. am i missing something or has anyone had this issue any help would be appreciated