Losing power during a update is a bad thing..1st thing I'd try is to find a much older firmware version (1XX) and try to update using this, then step...
check the lower roller and upper roller bearings. If they are not in the right way they cause excess torque to turn and usually just skips and breaks...
Anything with a "C"(office systems) in front of it can do banners...it's the finisher that inhibits the function on the C650 series...If the 517/608...
Since you say "unable to print color" I would assume you have the MAC driver installed correctly, but to be sure...It should be a IP printer and you...
That's because labels should only be printed through the bypass tray..And they should be labeled "for use in a plain paper laser printer"...When you...
I had an install a few years back and while giving the customers some training a lady needed a copy. She loaded her document into the ADF and pressed...
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Find latest posts
Likes Received (342)