gensys
Service Manager
250+ Posts

-------------------------------- so u went into the service mode and performed a board replacement procedure for CPU for Main PCB ?? After...

----------------- make sure your TEST PRINTS settings are correct--in service mode- COPIER>TEST>PG TYPE = Input a type number for test print....

Model : All Network Troubleshooting TCP/IP Checklist the best steps to take in troubleshooting TCP/IP...

imagePRESS Server T1 Installing System Software on the imagePRESS Server T1

iR2230(Optional) Platen Cover-H Document Tray-J1 iR3100C pedestal Envelope Feeder Attachment-C1 FL Cassette-Y1/Z1 Inner 2-way Tray-D1 Copy...

NOTE: If you have an external RIP, such as an imagePASS J1/H1, colorPASS GX-100 or imagePRESS T1/Q1, you will not have any PDLs listed on the copier...

this machine was a basic canon copier. go back in to service mode and check copier>display>version - look for the boot rom and see what letter is...

-------------------- remove the TI Open I/F PCB in printer > and re-seat it ?

No > but I keep receiving these weird signals > " PTPS " (post traumatic posting syndrome) I guess :eek:

???????????????? One more time :mad: DID U READ HOW TO "REMOVE ATR UNIT" PDF THAT I POSTED ABOVE > IT's CLEAR AND SIMPLE :p:p

Read the Solution posted ;}~)

Great point/ !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:cool:

Don't! Find trained Canon tech and go with him.:o

============ u need Printers Firmware to use SST :p

------------------------ there is a Package that includes both Printer Kit & Send Kit IR2270/2870/3570/4570, UNIVERSAL SEND & MULTI PDL PRINT...

======================; set power level in sleep mode from low to high. The error code E227 relates to a 24V Power supply error, and the...

Did u read the pdf I posted ???????????????

----------------------------------------------------------------------------- sounds like a power issue/ have u check your location outlets ?? ...

---------------------\\\\; MULTI FEED ASSEMBLY FF5-4327-000 /2 /ROLLER, PICK-UP FF2-4710-000 /1 /ROLLER, MULTI SEPARATION FF5-4331-000 /1...

----------- DRUM ISSUE :eek: HOW OLD ??

============================================ u did not register it correct in SST/ :confused: after u register > select connect>iA4045 >in...

Make sure u have the correct cable set up? see install manual Crossover cable goes from T1 to Printer side Ethernet Straight network cable goes...

to add on>:o remove all the pick-up units > to inspect> replace all paper feed rollers> that reg unit needs to be blown out with can air/ ...

---------- is the T1 a ver 1.0 or 2.0 believe the Macintosh OS X 10.8 (Mountain Lion) Driver is for the imagePRESS Server T1 v2.0 any...

============ OK - now we're getin somewhere:cool: do u see the PRINTER TAB > on control panel > u may have to scroll to it in upper left...

--------------- do u have an external server ( Q1/2 or T1) yes or no :confused: if yes>Make sure in the service mode...

--------------- do u have an external server ( Q1/2 or T1) yes or no :confused: if yes>Make sure in the service mode...