Tab Content
  • Hansen88's Avatar
    5 Days Ago
    Hansen88 replied to a thread MX-C401 post script in Sharp
    I reinstalled the macs and they are now printing again. Thanks for the help
    11 replies | 387 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 replied to a thread Strange printing issue in Sharp
    Thanks for the replies. The machine is low count and just had first maint with all new fuser roll,belt and bearings.One thing I just thought of for...
    9 replies | 385 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 replied to a thread Strange printing issue in Sharp
    P.S. the pages printed besides the wavy paper,garbled print also was not supposed to be a big square of color covering the page. I figured the...
    9 replies | 385 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 replied to a thread Strange printing issue in Sharp
    The wavy paper seems to happen only when you print. This may be a coincidence, but thos is the only time Iíve seen it occur. Hereís some samples:
    9 replies | 385 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 replied to a thread MX-C401 post script in Sharp
    Customer closed thursday and friday so I am going there monday. Ill try to reinstall the macs. Sounds like that should do it.
    11 replies | 387 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 started a thread Strange printing issue in Sharp
    This is a MX-3640 It is set up wireless. Random prints come out total gibborish. The strange part is some prints come out all wavy-not the print on...
    9 replies | 385 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 replied to a thread MX-C401 post script in Sharp
    Thanks for the tips,I will reinstall on the Macs
    11 replies | 387 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 replied to a thread MX-C401 post script in Sharp
    After I delivered the machine I put in the IP and gateway from the other machine and they test printed fine. After I was long gone they called and...
    11 replies | 387 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 replied to a thread MX-C401 post script in Sharp
    Kind of what I thought,but never tried before so not sure if it could be done or not.
    11 replies | 387 view(s)
  • Hansen88's Avatar
    1 Week Ago
    Hansen88 started a thread MX-C401 post script in Sharp
    We replaced a problem 401 with another 401 at a church customer we have. Didnt know the pastor and another person are using macs. The replacement...
    11 replies | 387 view(s)
  • Hansen88's Avatar
    2 Weeks Ago
    Hansen88 replied to a thread Airprint on a 3640 in Sharp
    Thanks for the reply. I have yet to go back to the customer yet,but I have got two machines at our shop airprinting without any trouble.
    5 replies | 503 view(s)
  • Hansen88's Avatar
    2 Weeks Ago
    Hansen88 replied to a thread ES-3040c CD-70 error in Toshiba
    Thanks for the replies. I went out there today and I replaced sensors and cut the cable ties off. I ran a lot to test copies and code did not come...
    4 replies | 255 view(s)
  • Hansen88's Avatar
    3 Weeks Ago
    Hansen88 started a thread ES-3040c CD-70 error in Toshiba
    This machine keeps giving the cd 70 error. we have replaced waste bottles, the old ones were not close to full or did not seem locked up,can see...
    4 replies | 255 view(s)
  • Hansen88's Avatar
    3 Weeks Ago
    Hansen88 replied to a thread mxm365 in Sharp
    Are the fuser pressure levers in the down position? Also in system settings go to device control and change setting of fuser temp from 16 to 23 to 23...
    6 replies | 498 view(s)
No More Results
About Hansen88

Basic Information

Date of Birth
June 6, 1968 (50)
About Hansen88
Real Name:
Jack
Country:
United States
Where are you from (City, State):
Waukegan IL
Occupation:
srvice tech
What Year Did You Start in this Industry:
1987
Favorite Manufacturer:
sharp so far
Last machine you were formally trained on:
Sharp 6240
Gender:
Male

Statistics


Total Posts
Total Posts
264
Posts Per Day
0.08
General Information
Last Activity
5 Days Ago
Join Date
12-22-2009
Referrals
0

03-12-2019


03-09-2019


03-07-2019


03-03-2019


02-27-2019


02-25-2019


02-22-2019