Yeah I did use this bulletin and it was semi helpful. As for checking the LEDs that was a challenge only because of limited work space. That's why I...
Same here had mpc 3003 with 670-01 Updated firmware, replaced op panel, nvram,cables, and it ended up being the BCU board. These two codes are always...
Sorry guys my morning coffee hasn't kicked in I was thinking a different machine. Copiertech has more insight to these codes definitely listen to his...
So here's the update. Replaced cables= still got sc 670. Replaced controller same code. Replaced BCU board and no codes in two days. Fingers crossed...
Ok so I have an sc 670-01 which only happens when coming out of power saving. These are the things I have done so far. I do have the TSB for this but...
Had quite a few toner hoppers go out on these models. As phil said check the tubes because they get backed up. The auger in the hoppers get bound up...
Had 2 schools down to one now. The one we have now is a small school with 3 machines 02 and 03s not a lot of calls except paper loading problems and...