Thanks, the problem gets complicated only because the copier is now located 5 hours from where I live, so even with a half hour fix-time it will be a...
So a customer has said that this ir5020 that I just sent him doesn't shut off using the control panel switch, though the main switch around the back...
There is the steel to force the no.30 (lever) to push down the pickup assy when the cassette drawer is close. normally what i did is i bend a little...
its usually the small gear broken that attached on registration motor. If you see it closely theres a crack on following gear but it doesnt sell with...
Apart from a digital glitch in the software as a previous poster has suggested I've only seen something like that when a customer had dumped his old...
New-to-you equipment is always sketchy to say the least. Mainly because you actually never did see it working in the first place. It's really hard to...
I assume that you meant "fan" and it's inside the front door with 3 screws holding it in place as well as 1 connector. Just replace it with one from...
Funny but these things just connect and go. I assumed that you completely unpowered the copier first so that it could reboot with the finisher being...
Using non genuine toner will cause this problem oftenly. Every few months u need to replace those gears and clean up. Genuine toner doenst cause this...
Find latest posts
Likes Received (5)
