Tab Content
No More Results

1 Visitor Messages

  1. xerox wc pro 255 doc.feeder help..?
    Hi folks,Im working on Xerox Workcenter Pro 255, copier is telling me to lift copier platen and lower flap to remove jam, as I did, theres o paper there,but I did find a removed staple in the photo-interrupter, which I removed. I then removed the sensor, and was sure that the sensor arm sprung back and forth o.k. Now Iwasnt sure if the staple got into the actual circuit board of the sensor..so I just cleaned the sensor, to no avail.it is giving me jam code 05-538.00 and 05-522, .at this point document feeder is out of order.Has anyone seen this sensor go bad..?..ide so, could anyone help me out with the part number for the photo-interrupter?..I know, I should have put my meter on it, but I didnt have my meter handy..any help/recommendations surely welcomed...!! thanks in advance.Jaime P.
    Independent Copier in CT.
Showing Visitor Messages 1 to 1 of 1
About jper34

Basic Information

About jper34
Real Name:
jaime
Country:
United States
What Year Did You Start in this Industry:
1983
What was the first machine you worked on:
np120
Last machine you were formally trained on:
fs1128
Gender:
Male

Statistics


Total Posts
Total Posts
121
Posts Per Day
0.05
Visitor Messages
Total Messages
1
Most Recent Message
05-20-2012
General Information
Last Activity
18 Hours Ago
Join Date
09-14-2011
Referrals
0

1 Friend

  1. IndependentChrisCT IndependentChrisCT is offline

    Technician

    IndependentChrisCT
Showing Friends 1 to 1 of 1
No results to show...