Jules Winfield
Field Supervisor
500+ Posts

I know this sounds too easy, but it's easy to check: See if one or more of the control panel buttons is stuck down. =^..^=

Could that possibly be a Canon NP-3050, as in analog? That's been obsolete for at least 10 years. I don't see any main motor conditions in my...

well you have the latests version of sst ..but you should be use the frimware ....trying search ..:rolleyes:

Regardless, choosing size and type is necessary, and probably has nothing to do with firmware.

I'm fairly sure there isn't a KM-3520. This is either an imaginary copier or maybe a KM-2530. =^..^=

I just google stuff I'm not familiar with...

Fasho...

Or turning to the comics first, before flipping to the serious news. That's a newspaper analogy for those of you have never seen one. =^..^=

unfortunate your countries is so far my countries ...real l hop visited this itmes ....

OK, just one more. This was probably 1992, or somewhere in that vicinity. I kept what I call the "Mini-Manual". It had 15 or 20 pages of the most...

I sure wish there was a book. Personally I was just thrown under the bus, when our network tech got himself fired. I knew how to install a print...

Clear and concise, as usual. =^..^=

Spend $199 from your local office supply for a new one, before you surpass that amount in labor cost? =^..^=

dude jules l am Technician Supervisor Field in maintenance for copiers and printers machine since 1997 l started working in this specialty ..l think...

Ahh, there he is. What's up, big pimpin'? What's a firmware discussion without Zaza?

It was dispatch. They wanted to know if I was dead. Got another good story. At the Sharp dealer during a tech meeting, we had a tech complaining...

always we search a new version of frimware ....asked our friend paul about this subject ...!!!

I hear what you're saying, but if there are no issues to address then updating firmware is not only a waste of time but may cause issues that weren't...

Thanks xeroid. I'll be interested in your conclusions. =^..^=

AFAIK those pins are all pressed in tight. I've never had one fall out. Yeah, those extra pages might contribute just a little to the jamming. ...

Interesting! So do you think the shorting 24vdc was somehow disabling the print or network functions? It was lucky that you got it before it took out...

The little devil blackcat was with me this day. It was a tiny little brother thermal fax, and the customer was complaining about the curly prints....

Agreed. The damage usually result when you plug the accessory back in, while still live. If you do something stupid like unplugging a live accessory,...

I'm glad we were there for you. =^..^=

I'll have to agree with the others. The only situation Turbo might be useful is if you're upgrading (1) version, and you have no issues to address. ...