Tab Content
No Recent Activity

2 Visitor Messages

  1. u have to reset with the Trouble reset procedure.
    hold down the tools/counter button while power on with the main switch(behind the small white cover) (maybe it was 0 (zero) button instead)
    and hold it until u have an black dot in upper corner of the display.
    just wait for trouble reset in the display and then press it, and chek for ok under
    turn off an then on after 10 sec
  2. I have a bizhub c550 and the control panel was not responding and after a while it displayed an error code C-3B04. I tried to reset the machine but can not complelet because of the control panel that is not responding. Is there any other way of resetting the machine without using the control panel?
    Thanks

    Dav
Showing Visitor Messages 1 to 2 of 2
About leo

Basic Information

Age
49
About leo
Country:
Norway
State/County:
no more romsdal
Occupation:
tech
What Year Did You Start in this Industry:
1992
Favorite Manufacturer:
Oce
What was the first machine you worked on:
roneo alcatel
Last machine you were formally trained on:
Oce CW600
Gender:
Male

Statistics


Total Posts
Total Posts
62
Posts Per Day
0.02
Visitor Messages
Total Messages
2
Most Recent Message
06-29-2012
General Information
Last Activity
05-19-2016
Join Date
06-05-2008
Referrals
2
No results to show...