Sorry for the late reply I just saw this today! We use one of the older PC based resetters which allows you to go in and read chips on new Oce IU's and toners and save the files so you can reload them into Minolta IU's and toners and make the brand change. This is only being done on the C250/252/300/352. I'm trying to get my hands on a C203/253/353 resetter but I'm finding out that their not PC based so I'm thinking we wont be able to do the same thing with the newer machines. Theres a guy on here name Pepper38CND and he is a beast when it comes to figuring this stuff out, get a hold of him and see what he says and I will do the same!
You made a post on a old thread called chip resetting that caught my attention you said "hell we even reset toner chips from the Imagistics(Oce) machines which allows us to use the Minolta toner and not their proprietary toner."
Can you elaborate on this more I have an issue where we are reciving a TON of Oce machines and are trying to figure a way to make the machines take konica toner and IU's. The machines are going from the km253 comparable up to the 6501. We where going to try flashin and reloading firmwares but are unsure of the results, we have not got the machines yet so haven't had a chance to do anything.
hi, my konica minolta 8020 is not starting. when i power it on only the start key gets red else nothing comes on the panel kindly please look into my matter
OMG.... the profile pic is TO DIE FOR....
I'm certain my finisher is FN 116. It creates books and booklets for me. I purchased this machine off Ebay back in August '08 and it's ran good for me. I just can't figure out why the code is thrown. This is a side business for me. I have a job due on Wednesday and am desperate.
I ser tech, i am facing problem in a photocoping machine. develop ineo 250, displays c-2557. i tried to reset with trouble clear. machine is getting ready, when copying paper is getting jammed in fuser and again same error.
paper jam in same place and each and every copy. kindly provide me some solution. my mail id firstname.lastname@example.org
Hey Mitchl. My name is Aaron, I have inherited the CopyXpress network faxing problem. I unfortunately have no experience setting up copiers and the like although I do have experience in setting up small computer networks with a single router. Am I correct in saying that in order to use the "networkfax" utility from the KM website, that I need the su-3 board? And that if I want to get around this I have to set up the computer to fax from its modem?