Hi Mr Spock
please help me with error situation at http://www.copytechnet.com/forums/ko...tml#post284327
Mate, you're an absolute legend.
Your posted link below solved all of my problems.
Thank you very much.
Hi, Mr. Spock
can you send link for E-studio 45 recovery CD thanks.
Hello Mr Spock,
Thanks for your contributions to this forum. I posted a thread in unitedtechs and I am greatful for your response. Pls can you help me procure the toner catridge empty sensor and harness cable for the hopper motors for estudio 520 AND the sys board for estudio 282?
I will be very glad if you can help me as the two machines have been down for weeks.
Thanks. My email is email@example.com
Mr spock tank you for youre friend acceptance new to this site did not know there was such sites all very interesting weird to see this job seems to be the same all over the world but maybe we have more tools available than some anyway cheers
hi my friend!
can you sent for me the firmware for the machine toshiba E-studio 850,450? thanks a lot!
help me with my friend
Toshiba E600 dongle plugged them into not trigger feature in
thank you very much
Help help!!! I'm against the wall with a CE40 code on a Toshiba 5520c. (It's actually a TA550c in disguise.) Says to check high densidty patter - I do - 65, 653, 65, 673 - so "High Density abnormality"
Manual says to check the laser and Drum Potential shutters (they work).
Disable Image Quality Control and Drum Surface Potential. (DOne).
05-394 (Image Quality open loop control).
Output test pattern. Result - All COLORS blank.
Perform 05-396 - Back to CE40.
Notes: There is a pattern on the Tranfer Belt, but I don't know if there's enough of a pattern to make a difference. Please help, this is my FIRST call on this machine.
you guys doing any hiring? used to live in Tampa - worked for the Borg - i mean IKON (like there's a differnce?). I still own a home there and want to move back.
Hope you are fine.Sir,I need firmware of Toshiba e studio 351c(upgradable through USB).I have ten e studio 351c.Few of them have bad Roms.When i get them copied from other Roms they work fine but after somtime they again corrupted and start giving errors.Last error i had was CF-30.I could manage to remove only when i get Rom on logic board copied from working machine's Rom.Please send me Lastest firmware or any link from where i could download the firmware.
Thanks in advance