Tab Content
More Activity

1 Visitor Messages

  1. View Conversation
    I had an issue with one that got moved. The shutter assembly is opened by a motor with an offset cam on the right hand side of the machine. There is an outer ring on the cam and it had become lodged in between the the frame and the rest of the cam. The laser assembly comes out pretty easy from the left and then you can reach in and touch or see the cam at the other end. While you have the laser assembly out try moving the shutter by hand. I suppose it could be bound up or something along those lines. I've not had the pleasure but the motor could be bad or the shutter sensor could be failed.
Showing Visitor Messages 1 to 1 of 1
About mrfuser

Basic Information

Statistics


Total Posts
Total Posts
1,557
Posts Per Day
0.25
Visitor Messages
Total Messages
1
Most Recent Message
08-25-2008
General Information
Last Activity
1 Week Ago
Join Date
05-03-2007
Referrals
0

6 Friends

  1. adriansto adriansto is online now

    Service Manager

    adriansto
  2. aesthetics1 aesthetics1 is offline

    Senior Tech

    aesthetics1
  3. copymech copymech is offline

    Senior Tech

    copymech
  4. EarthKmTech EarthKmTech is offline

    Step aside, noob

    EarthKmTech
  5. Synthohol Synthohol is offline

    Certified Konica Expert

    Synthohol
  6. xcopytech xcopytech is offline

    Service Manager

    xcopytech
Showing Friends 1 to 6 of 6

02-27-2024


02-23-2024