Tab Content
No Recent Activity

4 Visitor Messages

  1. Appreciate the response. Found a higher version of system software that fixed the issue.
  2. Hi Paul,
    Do you happen to have updated firmware & SST for the canon IR C3220?
    Many thanks,
    Lex
  3. Hi Paul, I don't know if I fixed it or not but I had another ir3530 machine with a jam right before the reg. roller. I switched the middle feed ass'y with the machine that had the e0110-0002 error, and now both machines are working fine. That was last thursday. I just took over 20 canon ir3530 machines that were n contract with someone else. Could the feed units been installed wrong? I really want to find out if this fixed it. I'm baffled!
    Thanks
  4. Hi Paul, you helped me out on a canon 9070 before and fixed the problem thank you again. I have a question on a ir3530 the machine has intermitant e00110-0002 error I replaced laser unit and checked laser shutter and still have problem. Have you seen this problem before?
    John
Showing Visitor Messages 1 to 4 of 4
About Paul 75

Basic Information

Age
49
About Paul 75
Real Name:
Paul
Country:
United Kingdom
Where are you from (City, State):
London, England
Biography:
Have a beautiful partner and four great kids 6mths,8,13,17 and 3 dogs! life isn't boring!!
Interests:
Fulhamfc,golf,playing rugby
Occupation:
Senior Service Engineer
What Year Did You Start in this Industry:
1995
Favorite Manufacturer:
Canon
Most Hated Brand:
none
What was the first machine you worked on:
Canon NP1215
Last machine you were formally trained on:
Canon Advance 9070
Gender:
Male

Signature


Oh...... I can't copy at the moment then ? !!!!!!

Statistics


Total Posts
Total Posts
97
Posts Per Day
0.02
Visitor Messages
Total Messages
4
Most Recent Message
10-24-2011
General Information
Last Activity
02-02-2016
Join Date
10-09-2008
Referrals
1
No results to show...