View Profile: paulrid - Copytechnet.com

1 Day Ago

Synthohol replied to a thread Bizhub 754e in Konica Minolta

if no code given, just look in svc mode in counters.

14 replies | 323 view(s)

2 Days Ago

Synthohol replied to a thread Konica Minolta bizhub 558 firmware in Konica Minolta

I know that was aimed at me so I will just say this, eventually they will find the manual somewhere from someone so since I see that as an...

4 replies | 202 view(s)

3 Days Ago

Synthohol replied to a thread J2002 from LCT.....C654 in Konica Minolta

take the cover off and measure the diameter of the outside of that grey roller compared to the middle. you can adjust the loop timing to see if it...

16 replies | 1425 view(s)

3 Days Ago

Synthohol replied to a thread IC-414 on a Biz C364e in Konica Minolta

ok, first reset and stabilize, do the gradations 3x each then you calibrate the fiery with a densitometer, no color cal ever. you are better off...

1 replies | 86 view(s)

5 Days Ago

Synthohol replied to a thread Bizhub C3350 exit roller removal in Konica Minolta

which ones? follow the clutch replacement on page g-61 in the SM to remove the exit unit. the scanner has to come off. btw, can you just roll...

3 replies | 177 view(s)

1 Week Ago

Synthohol replied to a thread [Misc] Print drivers in Konica Minolta

Support & Downloads - Business Products | KONICA MINOLTA

7 replies | 388 view(s)

1 Week Ago

Synthohol replied to a thread [Electrical] Main Power Switch Not Functioning - C6000l in Konica Minolta

I know this may sound silly but did you check the sub power switch on top to make sure that was on?

7 replies | 211 view(s)

1 Week Ago

Synthohol replied to a thread bizhub 958 vs bizhub Pro 958? in Konica Minolta

aw man, seems thats might be only available across the great pond, i didnt see it on U.S. KM site.

5 replies | 300 view(s)

1 Week Ago

Synthohol replied to a thread bizhub 958 vs bizhub Pro 958? in Konica Minolta

as far as i know there is only 1 958 and if it says pro its just a sticker. i checked the 1 stop shop on KM and only 1 958 came up and it didnt say...

5 replies | 300 view(s)

1 Week Ago

Synthohol replied to a thread Movie Data File Konica Minolta bizhub C224 and bizhub 363 in Konica Minolta

since you are a contributor, check your PMs for a link.

50 replies | 7916 view(s)

1 Week Ago

Synthohol replied to a thread BizHub C554 paper jam at fuser exit in Konica Minolta

Since nobody turned jam codes on to display the code, please go into service mode, counter and look at the jam history. This is key to properly...

13 replies | 740 view(s)

1 Week Ago

Synthohol replied to a thread Airprint/Mopria in Konica Minolta

Are the devices logged on to the wireless network? If not that's your answer.

13 replies | 555 view(s)

1 Week Ago

Synthohol replied to a thread Bizhub 458e scanning cut edges in Konica Minolta

Easy demo, take a sky shot and explain the void frame will never be copied ever. If it's uneven then adjustments can be made but there is always a...

5 replies | 302 view(s)

1 Week Ago

Synthohol replied to a thread Movie Data File Konica Minolta bizhub C224 and bizhub 363 in Konica Minolta

manuals, firmware, movie data and a whole lot more.

50 replies | 7916 view(s)

1 Week Ago

Synthohol replied to a thread Movie Data File Konica Minolta bizhub C224 and bizhub 363 in Konica Minolta

if you donate a few dollars to this site i will link you to my server. just an offer on the table unless someone else beat me to it ;)

50 replies | 7916 view(s)

1 Week Ago

Synthohol replied to a thread 284e B&W F/W update gone wrong! in Konica Minolta

wonder if it was a used board installed before you got it? id do a system data init and put the movie data back on and see if that fixes it. but...

11 replies | 398 view(s)

1 Week Ago

Synthohol replied to a thread C2070 click issue. in Konica Minolta

The reason that many of the color printers will count a page as color, even though the page content looks like Black and White or Gray, is that...

4 replies | 273 view(s)

2 Weeks Ago

Synthohol replied to a thread C2070 click issue. in Konica Minolta

I think there's a setting in the driver for treat Gray's as black if that doesn't work preprint the covers put them in a tray and use cover mode so...

4 replies | 273 view(s)

2 Weeks Ago

Synthohol replied to a thread BizHub C554 paper jam at fuser exit in Konica Minolta

Sorry if I missed it, what's the actual jam code?

13 replies | 740 view(s)

2 Weeks Ago

Synthohol replied to a thread c224e counter reset in Konica Minolta

This forum is for technicians working on copiers, perhaps you can email Konica minolta and see if they will help you with your project. I'm gonna...

52 replies | 7433 view(s)

2 Weeks Ago

Synthohol replied to a thread c224e counter reset in Konica Minolta

sure, i'll bite... what does that mean exactly?

52 replies | 7433 view(s)

2 Weeks Ago

Synthohol started a thread user cannot post... in Site Feedback & Questions

http://www.copytechnet.com/forums/members/jasonmschmidt.html can someone please check this user settings, seems all posts are moderated and do not...

1 replies | 133 view(s)

2 Weeks Ago

Synthohol replied to a thread Fiery question. IP in Konica Minolta

the 172.xx.249.2 address is just for display, the REAL emperon controller is the next IP up from the fiery. if you lock in the 172.xx address you...

11 replies | 483 view(s)

2 Weeks Ago

Synthohol replied to a thread [Misc] C1100 accessories compatibility in Konica Minolta

Is the install manual still with the machine it shows all the accessories and the combinations thereof that are compatible with this model if you...

3 replies | 180 view(s)

3 Weeks Ago

Synthohol replied to a thread Konica BH C654 FK-511 installation issue in Konica Minolta

you still have to initialize the fax and journal data. also did you make sure the HDD is set to installed? that will kill the fax if its unset.

11 replies | 409 view(s)

3 Weeks Ago

Synthohol replied to a thread Fiery question. IP in Konica Minolta

it displays a bogus address. just ignore it. as a matter of fact, the fact you do see a 172.xx.249.x is actually a good sign the fiery is...

11 replies | 483 view(s)

3 Weeks Ago

Synthohol replied to a thread Konica BH C654 FK-511 installation issue in Konica Minolta

try what he ^^^^^^said first. you can try backing up to USB and do a system data clear and then a fresh copy of firmware. install movie data and...

11 replies | 409 view(s)

3 Weeks Ago

Synthohol replied to a thread Konica Minolta C364e in Konica Minolta

PM sent. thanks for being a contributor!!!

1 replies | 179 view(s)

3 Weeks Ago

Synthohol replied to a thread C754e b/w copies counting as color in Konica Minolta

just set the machine to do black and white by default when they what color they can choose color there is something where you could choose the auto...

8 replies | 426 view(s)

3 Weeks Ago

Synthohol replied to a thread [Misc] Bizhub press 1060, Fusing belt runs to front side and brokes in Konica Minolta

does the belt have even tension? do a nip test to see if there is uneven pressure causing the belt to walk.

4 replies | 261 view(s)

paulrid
Senior Tech
100+ Posts

Mini Statistics

More 1 Friend

Synthohol

Recent Visitors

Basic Information

About paulrid

Statistics

Total Posts

General Information

1 Friend

Synthohol

paulrid Senior Tech 100+ Posts

Mini Statistics

More 1 Friend

Synthohol

Recent Visitors

Basic Information

About paulrid

Statistics

Total Posts

General Information

1 Friend

Synthohol

paulrid
Senior Tech
100+ Posts