Please , I need System of fiery PI7500, Do you can help me? ivanfourty@yahoo.com or any info about.
I need reinstall IC 401 controller on biz hub C350 and I donīt have instalation software, can you help me?
I finally reinstalled the software and it works great. Thank you very much!
How can i add power to you?
The FTP Host:81.180.92.50, user: bursuc , pass: bursuc. Thank you very much! You really save my life!
Hi, I have a problem with a Di450 a Pi5500 Fiery. The Pi5500 sais that the hard is full and i can't do anything to solve that problem. I tried "clear server" but the jobs are sill there. Somebody told me that i have to reinstall the system but i can't manage to find ver.2.0. I have ver.1.1 installed on another Pi5500 but with this I can't manage the scans as i wanted to. Can you help me with this problem? Thank You!
Dear Pepper38, I have a problem with a C252. After I power on the machine it shows sand clock on LCD for a while and then LCD goes off and machine never comes up. As I know this problem caused by NVRAM so I tried to use "4038-F000-Gon-G4-000.EXE" file that is "NVRAM Recovery Card for C250". I made CF with "Firmware Imaging Tools", but it didn't work and LCD shows only "Firmware Update" on title and nothing else. As release notes of this file shows it works only for MFP Products which is installed Phase 2.01 system or Later. I think my machine is Phase 1.0 so this recovery card doesn't work. I also have "C252_4038-F000-G10-H5-000(00)_CHECKSUM-A0C1" that is C252 firmware phase 3.0 but after downloading "MFP, Scanner, Printer" everything shows download OK. But my machine still goes down. Would you please guide me about thi problem? Thank You
Hi again its Mike from Barbados, sometime ago we chatted and you sent me the firmware for the IP601 print server for my Konica 7075. I seem to have lost the disk and file since then and I have to reload one of my IP boxes, would it be possible for you to resend me that firmware? my email address is miker@caribsurf.com Thanks hope to hear from you soon. Mike
Hi I was wondering if you could help me, I have a Konica 7075 with an IP601 printer server. I need to reload thesoftware on the Ip box but I do not have it, I know it contains 5 disk but not sure where to get it from, can you assist in anyway? If possible can you send it to my email at dalmain69@hotmail.com if you have it. thanks Dalmain
Hi; Do you have a service manual for Konica bizhub 7272 Thank you Tammy
Send an Instant Message to pepper38_cnd Using...
Senior Tech
Technician
Bradley
Junior Member
Major Asshole!
Trusted Tech